Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Troubleshooting

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old March 24, 2019, 07:48 PM
Shadowarez's Avatar
Hall Of Fame
 
Join Date: Oct 2013
Location: Arctic Canada
Posts: 1,303

My System Specs

Exclamation Need Help stabilize OC

Hi everyone finally got my storage phase upgraded to NASA levels with Optane and nvme. Started the oc phas but I'm having some issues need some help from our OC gurus now that I can focus on this phase 100%.

Current rig
1.Asus Apex x299
2.intel i9 7980xe {delidded/LM}
3.64gb 4X16 DDR4 3200 corsair LPX
4.Vega Frontier Edition (repasted Liquid Metal)
5.intel optane m.2 905 380GB (boot)
6.intel optane 900p 280gb (scratch) pcie card
6.intel 800p 118gb (HDD Cache)
7.intel 750 1.2TB nvme pcie
8.intel 750 400gb nvme pcie
9.WD Black 6TB 256mb cache (Bulk Storage)

I'm running into DPC watchdog errors or clock watch dog bluescreens.

I'll get my bios pics up asap to see where to tweak settings.
I'm running 4.6ghz all core 1.2v temps are in low mid 50s 70ish when benchmarking in haven.

Tried looking for basic guide for this board but seemed to only come up with guides for the rampage. I followed it set based on that for the Digi power settings. Ram in set xmp but I bumped voltage to 1.4v when started seeing these bsods isn't helping.

I'm getting these what seems random as in can happen at desktop idling or when installing games from steam.
My cooling setup is corsair H150i Pro with 3 120's 11 Noctua NF12s at the top. 3 140s intake at front. A 40mm Noctua on the vrms blowing air over them.
__________________
Beast
CPU - i9 7980xe 4.6ghz 1.15v
Cooler - Noctua NH - U12A
Mobo - Rog Asus Apex x299
Ram - 64 GB Corsair Vengeance LPX 3200mhz 4x16GB
GPU - Vega FE 1650 Core 1080 HBM 2 (1120MV)
PSU - Evga 1500 watt Supernova
Case Corsair 1000D
Storage
1.intel 905p 380GB M.2 (Os)
2.intel 900p 280GB U.2 to Pcie(Ark)
3.intel DC3700 1.6TB (Work)
3.iron wolf 14TB 256mb (Bulk)
4.intel 750 1.2TB (steam)
Reply With Quote
  #2 (permalink)  
Old March 24, 2019, 08:01 PM
JD's Avatar
JD JD is offline
Moderator
F@H
 
Join Date: Jul 2007
Location: Toronto, ON
Posts: 8,839

My System Specs

Default

I'm not sure if X299 differs much from X99, but I'd suggest leaving the RAM at "auto" so it runs at the slowest speeds while you focus on dialing in the CPU. Trying to do both at the same time makes life a lot harder.

Once you get a stable OC your happy with on the CPU, try changing your RAM to 3200 (don't use XMP as it'll wipe out your OC settings) and setting the voltages and timings accordingly. If it's unstable, then bump up voltages as needed.
Reply With Quote
  #3 (permalink)  
Old March 24, 2019, 09:25 PM
Shadowarez's Avatar
Hall Of Fame
 
Join Date: Oct 2013
Location: Arctic Canada
Posts: 1,303

My System Specs

Default

I'll try that I'll just get the xmp settings then dial those in once CPU is stable as I don't think I need 4.6 - 4.8ghz on all 18-36 cores yet.
__________________
Beast
CPU - i9 7980xe 4.6ghz 1.15v
Cooler - Noctua NH - U12A
Mobo - Rog Asus Apex x299
Ram - 64 GB Corsair Vengeance LPX 3200mhz 4x16GB
GPU - Vega FE 1650 Core 1080 HBM 2 (1120MV)
PSU - Evga 1500 watt Supernova
Case Corsair 1000D
Storage
1.intel 905p 380GB M.2 (Os)
2.intel 900p 280GB U.2 to Pcie(Ark)
3.intel DC3700 1.6TB (Work)
3.iron wolf 14TB 256mb (Bulk)
4.intel 750 1.2TB (steam)
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Trying to stabilize OC i7 920 p3t3rson Overclocking, Tweaking and Benchmarking 12 December 8, 2009 05:54 PM