Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Troubleshooting

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old February 2, 2019, 05:24 AM
Bond007's Avatar
Hall Of Fame
 
Join Date: Jun 2009
Location: Nova Scotia
Posts: 4,979

My System Specs

Default

Try testing one stick of the 2133 at a time. May be a bad stick.were you using XMP to load the ram freq/timings?
__________________
Desktop: Arc Midi R2, Z77-D3H, 3770@4.1ghz with Zalman Optima Cooler, 4x4gb ram, EVGA GTX 1070 Ti SC, Bitfenix Fury 750w, WD Black 1TB, MX500 500gb
Away from home: Lenovo Legion Y530, 16gb, i7 8750H, GTX1050Ti
Reply With Quote
  #2 (permalink)  
Old February 2, 2019, 07:42 AM
Top Prospect
 
Join Date: Oct 2012
Posts: 79
Default

Put the bios to default (cpu / ram speed) and test each stick as suggested and also the cpu. UBCD should have everything you need without having to reinstall the os.

If you have onboard gpu on the cpu, use this instead for the tests (could be a gpu problem).
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
is my cable box causing Internet problems? Shadowmeph Troubleshooting 6 October 11, 2017 05:49 AM
RAM or CPU causing problems? draemn Troubleshooting 1 June 5, 2014 01:00 PM
New case causing major problems (Fixed) Lyxtwing Troubleshooting 18 January 18, 2012 11:12 PM
Gigabyte 990FXA-UD3 causing problems evancoley CPU's and Motherboards 4 December 18, 2011 11:38 AM
Dual Booting causing problems for the 1st time element291 Troubleshooting 5 May 15, 2009 04:47 PM