Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Troubleshooting

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old November 25, 2016, 01:12 PM
Alpine's Avatar
Allstar
 
Join Date: Dec 2008
Location: Boucherville / South shore of MTL
Posts: 926

My System Specs

Default Dual monitor stand screw

Hey what's up guys ?

I wondering is anyone of you know which size of screw that i need to install my screen in that dual monitor stand ?

I have lost the srew when we have move from old to new house and i have decided to you is back again.

Thanks for your help.

https://www.amazon.ca/gp/product/B00...UTF8&psc=1#Ask
__________________
Main system
|I7 3930K|Asus P9X79 WS|2X Evga GTX 690|Samsung 256G Pro|H100|Dominator Platinium 16GB 2133Mhz|AX1200|540 AIR|SP2500|Vengeance 2000|IBM PRO/1000 PT Quad Port|



Last edited by Alpine; November 26, 2016 at 11:12 AM.
Reply With Quote
  #2 (permalink)  
Old December 6, 2016, 04:43 PM
Rookie
 
Join Date: Dec 2016
Posts: 4
Default

For standard VESA 75x75 or 100x100 (which are the likely ones for a monitor) spec says M4 screw and hole should be 10mm deep.

Bigger VESA mounts need bigger screws, M6 with the same depth for 200x200 and M8 and 15mm for 400x400 and above.
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Question RE: Dual LCD Stand drkCrix Display Units 2 November 7, 2016 12:04 PM
Logitech G27 with corresponding Wheel Stand Pro CRA5HMAN Price Check 2 September 1, 2015 08:20 PM
[FS] Dual D5strong + EK dual serial top + 24v dual controller $185 Shipped in Ontario canada2005 Buy/Sell & Trade 12 August 30, 2012 03:53 PM
Canadian Stand Off ZZLEE Off Topic 0 November 25, 2011 05:28 PM
Sapphire Announces New HD 6970 Graphics Card with Dual-BIOS and Dual-Fan Cooling Sam_Reynolds Press Releases & Tech News 1 November 1, 2011 11:50 AM