Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Troubleshooting

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old September 17, 2016, 10:28 AM
Top Prospect
 
Join Date: Oct 2010
Posts: 98
Default PC won't turn on

** nvm was too excited and plugged the power sw into power led pins noob mistake** all good now
just got a new pc.
evga g2 750 w
krait 3x gaming mobo
phanteks p400s case
corsair led 16gb ram 3000mhz
corsair hydro 110i v2
i7 6700k
gfx not arrived yet

i assembled everything.
I see a orange light for the LAN connection
i press power on the case but nothing happens
no fans are on
psu fan is not on
nada

double checked all my cabling seems fine
i got the 24pin in, i got the 8pin in for cpu, i got 1 sata for my case LED and for the ssd, i don't get it.
Either i am overlooking something or maybe the case is problem?
help :(

Last edited by elimtl; September 17, 2016 at 10:42 AM.
Reply With Quote
  #2 (permalink)  
Old September 18, 2016, 10:16 PM
wirerogue's Avatar
Top Prospect
 
Join Date: May 2012
Posts: 144

My System Specs

Default

since there doesn't appear to be a power switch on the motherboard, try shorting the 2 power pins on the motherboard with a small screwdriver. it only requires a momentary connection to start.
Reply With Quote
  #3 (permalink)  
Old September 19, 2016, 02:55 AM
KaptCrunch's Avatar
Hall Of Fame
 
Join Date: Feb 2008
Location: Ontario
Posts: 4,011
Default

re check power connections

can jump start psu
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
PC won't turn on Seperon Troubleshooting 9 February 9, 2015 04:22 PM
PC won't turn off... GT7R Troubleshooting 19 April 29, 2012 11:28 AM
Turn up your speakers.... encorp Off Topic 7 October 3, 2010 09:41 PM
My turn for a PC build bassplayerdave New Builds 22 September 22, 2010 10:35 AM
My turn to ask for help Cptn Vortex Troubleshooting 17 March 23, 2008 01:05 PM