Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Troubleshooting

LinkBack Thread Tools Display Modes
  #11 (permalink)  
Old September 14, 2010, 02:05 PM
Hall Of Fame
Join Date: Apr 2008
Location: Mission
Posts: 1,123

My System Specs


Originally Posted by nwa4life View Post
well i just chked the connections again... i changed the 8 pin on the card to the pci exp since i thought that it should go in.. i thought only 1 was needed.. also i changed the 8 pin for the cpu.. so i think it should be fine... then i tested it turned on. yay. but it was a black screen. then i turn it off and take out the ram so that its single channel. then i turned it on and it went to the bios.. then after i restarted to add my second 1 for dual... then it didnt turn on.. i think it either got to hot but it was weird... then it cant get to the bios but it can turn on.. also the dvd drive doesnt work so i cant install windows 7.. so wat now???
can install win7 from usb..

"Be so good at what you do that you cant be ignored"

Reply With Quote
  #12 (permalink)  
Old September 14, 2010, 02:06 PM
KaptCrunch's Avatar
Hall Of Fame
Join Date: Feb 2008
Location: Ontario
Posts: 4,018

remove power cord and read MB manual to reset bios
Reply With Quote
  #13 (permalink)  
Old September 14, 2010, 08:40 PM
nwa4life's Avatar
Join Date: Mar 2010
Location: Singapore
Posts: 28

ok well... it works fine now but the dvd drive still doesnt turn on... which is irritating. let me chk if i wired it right again and then ill see if anything is wrong.. ty.

jay: so how do u do that? u mean with an external dvd drive???
Reply With Quote

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
OK I built it, now what? LaughingCrow Guides & How-to's 16 April 24, 2010 12:56 PM
Scratch built Ken_C Cases 6 July 19, 2009 05:39 PM
Scratch built Ken_C Case Mods, Worklog & Gallery 5 June 27, 2009 11:02 AM
AMD new built Chris New Builds 45 April 25, 2009 07:26 AM
1000$ New built jspot69 New Builds 123 March 19, 2009 05:20 AM