Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Troubleshooting

LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old October 31, 2008, 06:18 PM
matsta31's Avatar
Hall Of Fame
Join Date: May 2008
Location: Montreal
Posts: 2,204
Default NO dispaly, asus P5eVM HDMI


I used this board with another Dual core CPU and a vendetta. Got bored so changed the CPU for a quad and finally used my second MCP350.

The board was working fine with the duo. So I unplug everything take the CMOS battery out, take the duo out and install the quad and Water cooling everything powers on... but no display signal.

Changed RAM, booted with one stick, used the monitor on another computer with success. SO I decided lets take out the CPU and see. And here is what I found, is this a problem ?

Name:  DSC03281.JPG
Views: 560
Size:  154.4 KB

there seem to be a pack of bent pins in there... not sure what to make of this.

Sold hardware again.....
Currently using WHS hardware....
Reply With Quote

Thread Tools
Display Modes