Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Overclocking, Tweaking and Benchmarking
Reload this Page G0 vs B3 X3210 results
Mark Forums Read
Media Gallery Register Members List LAN Calendar Search Today's Posts

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old October 21, 2007, 02:20 AM
Cptn Vortex's Avatar
Hall Of Fame
F@H
  
Join Date: May 2007
Location: Vancouver
Posts: 4,158
Default G0 vs B3 X3210 results
So, I had a B3 X3210 I had used for a bit, and was perfectly happy with. However, it would get quite warm, up near 70, which got me nervous. So I got my hands on a G0. Here we go. All I have is my desktop print-screens, which should work. For some reason Coretemp is being dumb and not launching on my screen, so it only appears in my task manager.

For testing purposes, I have the B3 at 2.8GHZ, 1.275V in Bios, 7x multi. Cooling is handled by my Swiftech Apex Ultra Plus, full system watercooling setup, with the chipset and 8800GTX in the loop.

The G0 is at 3.2GHZ, 1.25v in the Bios, with a 8x multi. So far 7 hours stable, and I have yet to test on lower voltage. I literally just poped the CPU in! Temps are great!! Under 50 degrees full load, with a 8800GTX and the chipset in the same loop! I'm definitely happy.
Attached Images
   
__________________
The Vortex H20

Corsair Obsidian 500D
Asus X99-E WS
i7-5820K @4.2GHZ
RTX 2070
4x4GB Corsair LPX 2666MHZ
Thermaltake Toughpower 850W GOLD
960GB ADATA SX8200 NVME
HP OMEN 32 1440p 75hz
Benq W1070 Pojector.

Watercooling:
EK Supreme HF, EK Vector RTX2080 FC, EK Coolstream XT 220 Rad, MCR320 Rad, EK-XTOP SPC-60 Pump, EK Multioption 100ml Res
Reply With Quote
  #2 (permalink)  
Old October 21, 2007, 02:22 AM
enaberif's Avatar
Hall Of Fame
  
Join Date: Dec 2006
Location: Calgahree, AB
Posts: 11,299
Default
nice!

To save some headache grab Prime95 v25.3 so you only need 1 program for stressing :)
Reply With Quote
  #3 (permalink)  
Old October 21, 2007, 02:25 AM
Cptn Vortex's Avatar
Hall Of Fame
F@H
  
Join Date: May 2007
Location: Vancouver
Posts: 4,158
Default
Hmm, maybe I will try that. Running 4 instances of Prime is starting to piss me off!!

Is there a good way of fixing the pics I added? Cause the way they are now, it is hard to view the temp values and what not, the font is too small! Help?
__________________
The Vortex H20

Corsair Obsidian 500D
Asus X99-E WS
i7-5820K @4.2GHZ
RTX 2070
4x4GB Corsair LPX 2666MHZ
Thermaltake Toughpower 850W GOLD
960GB ADATA SX8200 NVME
HP OMEN 32 1440p 75hz
Benq W1070 Pojector.

Watercooling:
EK Supreme HF, EK Vector RTX2080 FC, EK Coolstream XT 220 Rad, MCR320 Rad, EK-XTOP SPC-60 Pump, EK Multioption 100ml Res
Last edited by Cptn Vortex; October 21, 2007 at 02:27 AM. Reason: Edits
Reply With Quote
  #4 (permalink)  
Old October 21, 2007, 07:31 AM
sswilson's Avatar
Moderator
F@H
  
Join Date: Dec 2006
Location: Moncton NB
Posts: 17,695

My System Specs

Default
Quote:
Originally Posted by Cptn Vortex View Post
Hmm, maybe I will try that. Running 4 instances of Prime is starting to piss me off!!

Is there a good way of fixing the pics I added? Cause the way they are now, it is hard to view the temp values and what not, the font is too small! Help?
Not much you can do after the fact.

For the future, group your desktop windows close to each other and then use a screen cap program to select a "rectangle" which includes what you need to show.

Nice temps though!!!
__________________
ASUS ROG Strix Z370-G Gaming (WiFi AC) / i7 8700K / 2X 8G XPG Spectrix D40 (3000) / XFX XTR 750 / ASUS Strix GTX 1070ti
AZZA Titan 240 / Custom WC / Intel 730 Series 480GB SSD / Intel 760p 512GB NVMe / Seagate Barracuda 1TB / ASUS SWIFT PG279Q

Dell Optiplex 3020 / Intel Core i3 i3-4160 / 2 X 4GB DDR3 (Mixed) / Samsung 850 EVO 500GB SSD/ 24" Westinghouse L2410NM
Reply With Quote
  #5 (permalink)  
Old October 21, 2007, 09:33 AM
Fallen Folder
F@H
  
Join Date: Mar 2007
Location: folding in GTA
Posts: 375
Default
nice improvement

Where did you get your G0 x3210?
Reply With Quote
  #6 (permalink)  
Old October 21, 2007, 03:27 PM
Cptn Vortex's Avatar
Hall Of Fame
F@H
  
Join Date: May 2007
Location: Vancouver
Posts: 4,158
Default
I got my G0 from my workplace, FrontierPC. I ordered a few for some of my customers, and they were all coming in as G0, so I ordered one for myself, yup G0. Looks like most of the stock is all G0 now, including the Q6600's we stock too.
__________________
The Vortex H20

Corsair Obsidian 500D
Asus X99-E WS
i7-5820K @4.2GHZ
RTX 2070
4x4GB Corsair LPX 2666MHZ
Thermaltake Toughpower 850W GOLD
960GB ADATA SX8200 NVME
HP OMEN 32 1440p 75hz
Benq W1070 Pojector.

Watercooling:
EK Supreme HF, EK Vector RTX2080 FC, EK Coolstream XT 220 Rad, MCR320 Rad, EK-XTOP SPC-60 Pump, EK Multioption 100ml Res
Reply With Quote
  #7 (permalink)  
Old October 21, 2007, 03:40 PM
Cptn Vortex's Avatar
Hall Of Fame
F@H
  
Join Date: May 2007
Location: Vancouver
Posts: 4,158
Default
Here's a better link.

ImageShack - Hosting :: 32ghzwaterg0as3.jpg
__________________
The Vortex H20

Corsair Obsidian 500D
Asus X99-E WS
i7-5820K @4.2GHZ
RTX 2070
4x4GB Corsair LPX 2666MHZ
Thermaltake Toughpower 850W GOLD
960GB ADATA SX8200 NVME
HP OMEN 32 1440p 75hz
Benq W1070 Pojector.

Watercooling:
EK Supreme HF, EK Vector RTX2080 FC, EK Coolstream XT 220 Rad, MCR320 Rad, EK-XTOP SPC-60 Pump, EK Multioption 100ml Res
Reply With Quote
Reply


« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
HWBot Results: Prof. Dr. Silver Overclocking, Tweaking and Benchmarking 7 May 6, 2008 09:15 PM
New system, first OC results Spblue Overclocking, Tweaking and Benchmarking 10 January 5, 2008 01:43 PM
oc results so far Jim CPU's and Motherboards 7 July 25, 2007 12:52 PM
6000+ overclocking results Misoprostol CPU's and Motherboards 11 April 9, 2007 12:27 PM