Hardware Canucks

Hardware Canucks (https://www.hardwarecanucks.com/forum/)
-   HardwareCanucks F@H Team (https://www.hardwarecanucks.com/forum/hardwarecanucks-f-h-team/)
-   -   folding@home thread. Updated as necessary - _dangtx_ (https://www.hardwarecanucks.com/forum/hardwarecanucks-f-h-team/24482-folding-home-thread-updated-necessary-_dangtx_.html)

ITaoI October 24, 2009 09:10 PM

:ph34r:safe cpu vcore should be 1.5v and dan what your nb frequency? It good that you know to lower your ht link for more stability.

_dangtx_ October 24, 2009 09:23 PM

Quote:

Originally Posted by ITaoI (Post 276801)
:ph34r:safe cpu vcore should be 1.5v and dan what your nb frequency? It good that you know to lower your ht link for more stability.

1.5 it is. i havent touched the other voltages, no need. board can do a lot more, cpu cant i gues..unless theres some tweaks i havent figured out yet(probably). nb and sb especially must be better cooled for high sustained fsb's.

as for the nb ht links i put them around stock..in the bios it says one has to be lower than the other else itll be set to defaul=bad when oc. im pretty sure i can get any of the two(this board and this cpu) going above 3ghz easily ram forgiving. and cooling too..ill put the better cooler on when i dont feel lazy..should be a few more degrees off.

bwm October 24, 2009 09:34 PM

Quote:

Originally Posted by _dangtx_ (Post 276793)
yeah ok but if you can buy twice the gpu power,wouldnt that mean more ppd? :)

Prolly, but I don't see AMD/ATI producing anything that beats nVidia ATM. And you know I don't like nVidia LOL except for GPU folding. Outside of that, I have no use for that company.

bwm October 24, 2009 09:37 PM

Quote:

Originally Posted by _dangtx_ (Post 276787)
bro for folding even x4 dont matter..right? :)

I don't think that is true, but I can't prove it either. I've yet to see a truly credible test of vid card capabilities at x4 and x8, and no one ever will unless the an IEEE accredited lab does it.

_dangtx_ October 24, 2009 09:42 PM

well no. amd board and cpu and nvidia gpu


took a few minutes for cinebench to treacherously steal the cycles from smp lol but it got a healthy 98% cpu usage....and it looks like some cores are faster lol


http://img23.imageshack.us/img23/9843/cinebench.jpg

ITaoI October 24, 2009 09:55 PM

The temps your at look about right for the fsb your trying run btw what volts is it on? Stock for ht link is ok from 1.8-2.1 is the sweet spot anything higher no noticeable difference. You should try and aim for 2.4-2.6 nb frequency even 2.8 now that a noticeable difference. Just give you a rough idea my nb frequency atm is @ 2.4 with 1.3v. You should not need to increase sb volts at all so better cooling for that area isn't necessary i believe. BTW get a pic from cpuz for memory might be able help you abit more...

bwm October 24, 2009 10:06 PM

Quote:

Originally Posted by _dangtx_ (Post 276819)
well no. amd board and cpu and nvidia gpu


took a few minutes for cinebench to treacherously steal the cycles from smp lol but it got a healthy 98% cpu usage....and it looks like some cores are faster lol


http://img23.imageshack.us/img23/9843/cinebench.jpg

You know me dan, I don't dig into benchmarks like most enthusiasts do. Hard drives, yes, and you know why. But the rest of a rig, nah. Benchmarks are PPD for me, the PPD whore, das it :biggrin:

_dangtx_ October 24, 2009 10:34 PM

the only voltage i touched is cpu 1.5 and mem 2.0.wich isstock for ram..

what screenies you need?


http://img21.imageshack.us/img21/2669/51899364.jpg



http://img44.imageshack.us/img44/3194/nb2o.jpg




http://img196.imageshack.us/img196/8351/65059350.jpg

_dangtx_ October 24, 2009 11:44 PM

ACC
 
looks like me chippie doesnt have l3 or i dont know what im doing(good possibility)


http://img200.imageshack.us/img200/3840/aacw.jpg


http://img12.imageshack.us/img12/2421/aac1k.jpg



http://img44.imageshack.us/img44/5050/aac2.jpg




http://img44.imageshack.us/img44/5189/aac3.jpg



:ph34r::ph34r::ph34r::ph34r::ph34r::ph34r::ph34r:: ph34r::ph34r::ph34r::ph34r::ph34r::ph34r::ph34r::p h34r::ph34r::ph34r::ph34r::ph34r::ph34r::ph34r::ph 34r::ph34r::ph34r::ph34r::ph34r:

bwm October 24, 2009 11:57 PM

That's way over my head bro.


All times are GMT -7. The time now is 11:21 PM.