Hardware Canucks

Hardware Canucks (https://www.hardwarecanucks.com/forum/)
-   Case Mods, Worklog & Gallery (https://www.hardwarecanucks.com/forum/case-mods-worklog-gallery/)
-   -   Case Pics (https://www.hardwarecanucks.com/forum/case-mods-worklog-gallery/86-case-pics.html)

Prof. Dr. Silver December 12, 2007 04:58 PM

I wrote a review on this case and I see you have exactly the same issue as I have....that stupid CPU Power cord is too short! So no other options left than running it across the board!

Theblackmages December 12, 2007 05:41 PM

Quote:

Originally Posted by Prof. Dr. Silver (Post 30056)
I wrote a review on this case and I see you have exactly the same issue as I have....that stupid CPU Power cord is too short! So no other options left than running it across the board!

Yes, its too short, and thats considering the OCZ cables are pretty long, well it doesnt look too bad, but it would look way cleaner.So yeah. and omgwtf, the motherboard isnt small, the case is just hugeeeeee .lol

well I just went to replace my pioneer dvd burner at microbytes and got a new one, works now. Only thing left is my HD3870....

darkorb December 12, 2007 06:31 PM

why is ur ram in slots 3/4?

Theblackmages December 12, 2007 06:40 PM

cause i thought the first 2 slots were too close to the cooler... I don't think it changes anything.:P

omgwtf December 12, 2007 06:58 PM

Dual channel...

werty316 December 12, 2007 07:02 PM

Running dual channel on on an Intel rig really isn't as big as a deal when compared to AMD based rigs since Intel chips don't use an onboard memory controller like AMD CPUs do.

Theblackmages December 12, 2007 07:11 PM

you're right its running in single channel, but i thought because the colors were the same it would run in dual channel.... I havent seen any mention of it in the bios either, so do i have to put it in the first slots to make it work?

werty316 December 12, 2007 07:13 PM

Usually you have to install memory sticks into slot 1 & 3 to enable dual channel.

Not all board makers have their DIMM slots colour coded for dual channel and who know why.

Theblackmages December 12, 2007 08:02 PM

Quote:

Originally Posted by werty316 (Post 30099)
Usually you have to install memory sticks into slot 1 & 3 to enable dual channel.

Not all board makers have their DIMM slots colour coded for dual channel and who know why.

well for me 2 are yellow and 2 are green.... weird.

omgwtf December 12, 2007 08:10 PM

first one yellow second green, third yellow and fourth green ..or like 1&2 yellow and 3&4 green?


All times are GMT -7. The time now is 02:02 PM.