Hardware Canucks

Hardware Canucks (https://www.hardwarecanucks.com/forum/)
-   Case Mods, Worklog & Gallery (https://www.hardwarecanucks.com/forum/case-mods-worklog-gallery/)
-   -   Case Pics (https://www.hardwarecanucks.com/forum/case-mods-worklog-gallery/86-case-pics.html)

sswilson May 24, 2007 04:07 PM

Quote:

Antec SpotCool
That the one that you can set up anywhere you feel the need for a little extra airflow? I think I've looked at it a couple of times and thought it would be a good idea to have around for folks without active chipset cooling.

lowfat May 24, 2007 04:28 PM

Ya that is the one. Same price as the OCZ XTC cooler I had, and much much better.

omgwtf May 25, 2007 04:55 PM

lowfat what case is that? it's pretty huge..

Moneyless May 25, 2007 04:59 PM

Quote:

Originally Posted by omgwtf (Post 10215)
lowfat what case is that? it's pretty huge..

Says in his sig (and it's pretty easy to see,) that its a CM Stacker 830.

lowfat May 29, 2007 10:57 AM

motherboard backside. AHH!!
http://i18.photobucket.com/albums/b1...on034Large.jpg


and the otherside :)
http://i18.photobucket.com/albums/b1...on035Large.jpg

3.0charlie May 29, 2007 07:03 PM

lowfat, two observations:

1. protect the harnesses from the sharp edges that were created when you drilled the mobo back panel; with time, the harnesses will chafe and wires will be cut.
2. raise that reservoir higher than the pump, making sure that the pump is always fed. I use the bracketry that came with the res to attach it to the case back panel. Just one screw is enough.

I do like your cable management though, nice and clean.

John

lowfat May 29, 2007 08:08 PM

The holes for most part are pretty smooth, I sanded the majority of them down. I couldn't find a file to do a couple of them, but they will be sanded down smooth soon enough.

And the res is almost the same height as the pump. It just looks indifferent from the pictures. When their is water in the res, the water flows right into the pump..

DurkaDurka June 6, 2007 06:12 PM

Here is a pic of my current rig, cabling needs some work but it's getting there.

http://i39.photobucket.com/albums/e1...c22/danpc1.jpg

lowfat June 7, 2007 03:52 PM

You are the first person I've seen with that HSF actually in a system.

JayDee June 7, 2007 04:09 PM

Awesome job lowfat! Super clean :thumb:


All times are GMT -7. The time now is 02:55 PM.