View Single Post
  #29 (permalink)  
Old March 31, 2008, 05:26 AM
sswilson's Avatar
sswilson sswilson is offline
Join Date: Dec 2006
Location: Moncton NB
Posts: 17,851

My System Specs


Originally Posted by Varroa View Post
That rad rits very nicely compared to my Cosmos 1000. I love my case but the cable thing in the back was a pain in the butt until I figured out there wasn't enough room to route the cables over those bars in the back of the case. My 2x120 swiftech rad fits fine up-top but I haven't tried to do that push/pull configuration like you, I just have two fans on the inside of the case pushing air through the rad. Nicely done!
Yeah, the Cosmos 1000 was designed to hold both 120mm or 140mm fans up top, so you can only get one fan lined up.

This is what I ended up with using one of the swiftech res/rads (the quad xeon for this build should be in today so I can get the WC completed).

I've mentioned it in another thread, but it's worth putting the info in here for comparison between the 1000 and the S that I was only able to fit a single fan on the bottom, but I'll have to revisit that and verify that the fans won't fit on top.
ASUS ROG Strix Z370-G Gaming (WiFi AC) / i7 8700K / 2X 8G XPG Spectrix D40 (3000) / XFX XTR 750 / ASUS Strix GTX 1070ti
AZZA Titan 240 / Custom WC / Intel 730 Series 480GB SSD / Intel 760p 512GB NVMe / Seagate Barracuda 1TB / ASUS SWIFT PG279Q
Dell Optiplex 3020 / Intel Core i3 i3-4160 / EVGA GT 1030 SC / 6GB DDR3 / Samsung 850 EVO 500GB SSD/ Samsung 27" 1080p (Curved)
Dell G3 - i5 8300H / HP EX920 512GB NVME / 2X8GB HyperX Impact / 1TB SSHD / GTX 1050ti / N156HHE-GA1 120HZ Monitor
Reply With Quote