View Single Post
  #7 (permalink)  
Old December 5, 2008, 08:49 PM
CactusJoe CactusJoe is offline
Top Prospect
 
Join Date: Oct 2008
Posts: 169
Default

I tried 2 things

1- I tried to change the FSB and or multiplier

I do not have a picture, so here we go.
Quote:
"Set memory frequency by DRAM SPD data
(G)MCH strapping

x.xxA->FSB266MHZ
x.xxB->FSB333MHZ
x.xxC->FSB200MHZ
x.xxD->FSB400MHZ"
Basicly, I tried every possible combination and I still can't go over 800. 800 is actually the "best" combination. Which is quite annoying because If I can't get my ram to work to 1000mhz, then I bought it for nothing.

2- I increased the voltage to 2.0V
Cpu-z is not monitoring any significant change. But, instead of telling me my ram works @ 400mhz, it says its 400.1! haha..

Quote:
"Type DDR2
Channels Dual
4096 bytes
DCmode Symetric
DRAM frequency 400.1Mhz
FSB:DRAM 1:2
Timings 5
4
4
12"
So, what should I do?
I really want my ran to work @ 1000mhz :P

PS: I'll try to include pics tomorrow if required
Reply With Quote