| |||||||
|
I was juust about to say that shouldnt the Res be above the pump i seen a similar build lately of someone putting it on the ground i cant remmber who it was... Thanx for pointing it out Charlie.
__________________ Intel Xeon E3110 @ 3.0ghz XFX 8800 GT Alpha Dog Edition Asus P5Q-E Mushkin Ascent Redline 8000 4gb DDR2 @ 1066 5-5-5-15 2.05v OCZ 600W GameXstream Seagate 7200.11 500gb Seagate 7200.10 320gb Antec Spot Cool Logitech X-230 Samsung 32" 720P HDTV Coolermaster Cosmos S/ Swiftech Mcp655/ MCR-320-QP/ 6X Noctua NF-P12'S/ Swiftech Apogee GT/ Swiftech Mcw-60/ Swiftech Micro-Res. |
| |||||||
|
Wooo Hoooo....new toys got here today!... Here's a few pics of a mock setup, I'll be using red tubing (maybe a couple of green). The res is going to be a bit harder to fill but not too bad. Unfortunately the 280's are still 10-12 days away so I'll have to wait to test it. I picked up a GTZ from Gav's great sale but I think I'll go with the TT one that came with the case and see how well it works then try the GTZ. These Koolance wb's are pretty slick lookin'!!...I hope they work as sweet as they look! I like the look of the XSPC top, even has 2 light plugs to make that clear acrylic look cool and the res has light in the acrylic base so that should look real purdy! Have to give the guys down at Performance-PC a big Thank You! They were very helpful, the service so far has been excellent. The fact they were dealing with Fay at the time and managed to get my package out was pretty impressive. I saw news footage from Palm Bay where the flooding was pretty severe and not fun thing to deal with so I hope everyone down there is ok.
__________________ evga 780i ftw - qx9650 w/GTZ - 4x1gb ocz plat.1066 w/cooler - 2x gtx 280's w/VID 428 Koolance fc wb's |
| |||||||
|
All those beautiful blocks, but the Thermaltake???? Lol. Nice lookin setup so far, like the passive rad idea!
__________________ The Vortex H20 Case....not sure what to call it DFI X38 LT Xeon X3210 @ 3.2GHZ 1.30V PNY 9800GX2 (750/2200) 4GB Corsair Dominator 2x2gb kit DDR2 1066 5-5-5-15 2.0V Ultra X3 1000W PSU HT Omega Striker 2x500GB Hitachi RAID 0, 250 Seagate Sharp 32" Aquos 1080p Benq W500 1080i Pojector. Watercooling: Loop 1 - D-Tek Fuzion Quad Nozzle Bowed, MCR320+Zalman ZM-F3 Fans, MCP655, MCRES Micro. Loop 2 - DB-1, DD 9800GX2 block, MCW30, MCR320, tLine res. |
| |||||||
|
Why did I know I was gonna hear that!...lol...only reason I want to try the TT is to check temps then switch to the GTZ to see how much difference there is. I like the passive rad too, I'm just not sure about having it and the triple rad all hooked up...that's ALOT of fluild!...any thoughts on this?
__________________ evga 780i ftw - qx9650 w/GTZ - 4x1gb ocz plat.1066 w/cooler - 2x gtx 280's w/VID 428 Koolance fc wb's |
| |||||||
|
That should be ok. Is it aluminum though? If so, make sure you use a good coolant and good Biocide, you done want corrosion.
__________________ The Vortex H20 Case....not sure what to call it DFI X38 LT Xeon X3210 @ 3.2GHZ 1.30V PNY 9800GX2 (750/2200) 4GB Corsair Dominator 2x2gb kit DDR2 1066 5-5-5-15 2.0V Ultra X3 1000W PSU HT Omega Striker 2x500GB Hitachi RAID 0, 250 Seagate Sharp 32" Aquos 1080p Benq W500 1080i Pojector. Watercooling: Loop 1 - D-Tek Fuzion Quad Nozzle Bowed, MCR320+Zalman ZM-F3 Fans, MCP655, MCRES Micro. Loop 2 - DB-1, DD 9800GX2 block, MCW30, MCR320, tLine res. |
| |||||||
|
Thanks.....It is aluminum, I will be using PC Pure Extreme Cool, should I be adding biocide to that?
__________________ evga 780i ftw - qx9650 w/GTZ - 4x1gb ocz plat.1066 w/cooler - 2x gtx 280's w/VID 428 Koolance fc wb's |
![]() |
| |
| Thread Tools | |
| Display Modes | |