Compact Watercooled Gaming Rig! (planning stages)

[Cptn Vortex]

So, I am about ready to embark on a new rig build. Mainly for fun, and probably going to sell the end polished result. Parts I am looking at:

NZXT Rogue Case
Asus P5E-VM HDMI or Gigabyte G33M-DS3 (Thoughts?)
2GB DDR2 800
Possibly 3850, we will see.
H20-120 Compact, possibly add a second 120mm RAD to the sidepanel.

I think I could do it quite well.

[3.0charlie]

Hey! That was my next build idea! I think the case is a great choice, and has plenty of water-cooling possibilities. I would choose the DS3 over the P5E anytime - one heck overclocker! My vc choice was the 3870 - with the hot air exhaust to the outside this will help the internal temps. As for the rad, I was looking at a dual 120 on one side.

Which PSU have you chosen? Modular, I hope?

Have fun building it, it will look awesome!

[Cptn Vortex]

Well for now I have a pair of Ultra 500W's just sitting there. I will want to get a decent modular one down the road for sure. Probably an antec NEO 550, under $100 easy.

[MpG]

I'd be thinking a dual rad on the side too, but I'm not sure if the rad + fan would be too thick to fit. Might hit either the expansion slots or the motherboard peripherals. Hard to tell with the photos they provide.

Should be a good-looking setup when you're done!

[Prof. Dr. Silver]

Originally Posted by Cptn Vortex

Probably an antec NEO 550, under $100 easy.

Hey I happen to have one of those, it is used though....The Antec Neo HE 550W..Or do you really need a new one? How much are you willing to PM me? LOL

[Cptn Vortex]

Hey Prof, I will consider it, for sure. Probably going to be a few days or weeks, however, I will have the case tomorrow.....

[3.0charlie]

I have a Neo 500W (check sig) and it's a great PSU. With such a small size, I believe a modular PSU is a must.

[Empty_Quarter]

For the motherboard, I'd go for the P5E-VM HDMI, it has a higher OC potential.

[Cptn Vortex]

Yeah, it may be the one to go with. I think for now I am going to be starting it off with using just the on-board video, just to use as a simple mediacenter machine off the start. Then when it comes time to sell It I'll throw a vid card in. The P5E-VM HDMI would be much better, as my TV only has HDMI inputs, no DVI or VGA. Saves a cable converter!

[Cptn Vortex]

What are your thoughts on the EVGA 630i boards? Decent OC out of a 800FSB chip? They're on sale for like, $60, I kinda can't say no!