Go Back   Hardware Canucks > CASES & COOLING > Water Cooling

    
Reply
 
LinkBack Thread Tools Display Modes
  #21 (permalink)  
Old July 5, 2008, 07:53 AM
Mibs's Avatar
MVP
F@H
 
Join Date: Jun 2007
Location: St. John's, NL
Posts: 311
Default

Great thanks for the advice! Is it just me or is there a lot more people getting into WC lately? It could be that I just noticed it more because now I'm quite interested in it.
__________________
Intel C2D E6750 @ 3.52 GHz // EVGA 680i SLI Rev. A1 (P31) // 4 GB OCZ Platinum 800 MHz 4-4-4-15 // PC P&C Silencer 750 Quad // Antec P180 // EVGA 8800 GTS 512 // Samsung Syncmaster 226bw 22" LCD

WC Loop: D-Tek Fuzion V2 // Danger Den Maze 5 // Swiftech MCP655 // Swiftech MicroRes // Thermochill PA 120.2 + 4 x Noctua NF-P12
Reply With Quote
  #22 (permalink)  
Old July 5, 2008, 07:58 AM
ebdoradz's Avatar
Allstar
 
Join Date: Mar 2007
Location: Rouyn-Noranda, QC
Posts: 754
Default

ive promise myself to buy a new computer only when BF3 will be release on PC, soi will have my new PC only in couple month even next year ......

to satisfaid my modding tentation im going under water and i will try pushing my system a bit further

then i will reinstall all those WC parts in my next build
__________________
Gigabyte GA-MA790XT-UD4P / AMD Phenom II x3 720BE @ x4/ Crucial Ballistic DDR3 / Sapphire 4830 512mb / Corsair 620W PSU / 2*80GB Seagate

DFI LP nF4 Ultra-D / AMD Opteron 165 @ 2.7Ghz/ 2*1GB OCZ Gold GX XTC / Sapphire X1950XT / Fortron 450W PSU / 2*Maxtor 80Gb


Reply With Quote
  #23 (permalink)  
Old July 5, 2008, 11:01 AM
Top Prospect
 
Join Date: Mar 2008
Location: Vancouver, BC
Posts: 144
Default Reply

If you want an aftermarket top for the Swiftech 655, EK is currently developing one. Also I believe Koolance has a top(don't worry it's nickel-plated). I think your wc parts are good to go.
Reply With Quote
  #24 (permalink)  
Old July 5, 2008, 02:53 PM
Dashock's Avatar
Hall Of Fame
F@H
 
Join Date: Nov 2007
Location: Toronto
Posts: 1,938
Default

Ohh the more people that do logs for watercooling the more people get comfortable by learning and being able to go under water themselves i was always interested in watercooling but lack of knowledge and lack of images from users who have setups and other factors kept me away but after seeing many peoples rigs on this forum and with the great help from many of the forum members i took the plundge.
__________________
Intel Xeon E3110 @ 3.0ghz
XFX 8800 GT Alpha Dog Edition
Asus P5Q-E
Mushkin Ascent Redline 8000 4gb DDR2 @ 1066 5-5-5-15 2.05v
OCZ 600W GameXstream
Seagate 7200.11 500gb
Seagate 7200.10 320gb
Antec Spot Cool
Logitech X-230
Samsung 32" 720P HDTV



Coolermaster Cosmos S/
Swiftech Mcp655/ MCR-320-QP/ 6X Noctua NF-P12'S/ Swiftech Apogee GT/ Swiftech Mcw-60/ Swiftech Micro-Res.

Reply With Quote
  #25 (permalink)  
Old February 5, 2009, 04:31 AM
MVP
F@H
 
Join Date: Jan 2009
Posts: 276
Default

I'm planning on making the leap to water cooling on my next build, too. Like the last poster said, it's kind of daunting - it makes me feel like my first build all over again.

:rtfm:
Reply With Quote
  #26 (permalink)  
Old February 7, 2009, 09:31 AM
KaptCrunch's Avatar
Hall Of Fame
 
Join Date: Feb 2008
Location: Ontario
Posts: 2,923
Default

Quote:
Originally Posted by Mibs
I've decided to finally go with liquid cooling. Folding is making a lot more heat than I'm used to and going water is something I've always wanted to do, so why not now! Anyway I was hoping some of you guys could help me out here, I've been doing some research and chosen what seems to be some of the best choices out there, but any advice would be appreciated. I'm only planning on adding my CPU to the loop at the moment but I am seriously considering adding the GPU in the near future. So here's what I have chosen:

Feser One Water replacement

Swiftech Mcres-Micro

Tygon 1/2" ID Tubing


Swiftech MCP655

Thermochill Pa 120.2

Finally for the CPU block I chose the D-Tek Fuzion V2. I already bought that from the HWC sponsored deals...Couldn't pass up the price!

I know a single rad might be enough for just the cpu but I want the option to add the gpu later. As for the clamps and screws etc, I can get all that at the hardware store I'm pretty sure. Oh and I also had to add a pair of barbs to go with the rad..I even managed to find those cheaper on pricecanda! Sorry for another thread just listing parts and looking for help but water cooling is quite new to me...thanks for the help!
1) feser coloured fluid will gunk up overtime best use UV tubing if want color

2) mcres ok try to get the version 2

3) good stuff get the colored stuff

4) D5 ok if want small pump the ddc with top out pumps the D5

5)rad be careful of screws not to punching a hole in the rad when mounting the fans
an TH uses 3/8 bungs
Reply With Quote
  #27 (permalink)  
Old February 8, 2009, 01:52 PM
Top Prospect
F@H
 
Join Date: Jan 2009
Location: mississauga
Posts: 107
Default

I'm thinking to go wc to.I want to cool my cpu for now,in the future i want to add gpu also.I'm not an exterm overclocker.I bought this parts:
- Swiftech MCR220
-
Masterkleer
- Bitspower
- Feser
- Swiftech
Now a few questions:
1)For the pump i was thinking to buy this MCP655-B,but i don't now how loud it is?
2)I saw this fittings from Bitspower, they are better than regular fittings?
3)When i will add the gpu to the loop i want to add another Swiftech MCR220?

I want to apology for my english,it s not that good.
Thank you
__________________
HEAT
Hardware Canucks
Overclock.net
RFD
Reply With Quote
Reply


Thread Tools
Display Modes