PA 120.1 loop position

[freakgeek1337]

Ughhh this is sooooo confusing. Well then in this case, I don't have much to say. BTW Varroa's thick rad is a Thermochill. Proof in link.

NCIX FORUMS - Would this rad be better than the rad in... - Thermochill Pa 120.1 Single 120MM Water ...

[sswilson]

Yeah, the difference is in the motherboard heatsinks. If you look at the pic, you can see that the rad is hanging quite far over the motherboard. That isn't possible with the heatsink on the DQ6.

Thanks for the link though, it verifies that a PA will actually fit given the right motherboard.

[MpG]

Originally Posted by sswilson

I wonder if 2X PA 120.1 at opposite ends of the 3X top mount of the case would provide better cooling than the single MCR 120? That would leave the center fan mount up top as a true top exhaust.......

Originally Posted by sswilson

Actually, my plan is to leave the 320 in place and supliment its cooling with a single PA 120.1.

Eh? I thought the first quote was you thinking of replacing the MCR320 with a PA120.1 at each end. (With the MCR 120 being a typo).

And I don't know how much stock I'd place in that particular Thermochill-MCR320 comparison. It's widely circulated, and the guy who did it is well-regarded, but even Thermochill's own test data doesn't quite agree with it. If you check out the thermal dissipation graphs towards the bottom of the link, you can see that the MCR-220 isn't actually that far below the PA120.2, even with 1200rpm fans.

[sswilson]

Originally Posted by MpG

Eh? I thought the first quote was you thinking of replacing the MCR320 with a PA120.1 at each end. (With the MCR 120 being a typo).

And I don't know how much stock I'd place in that particular Thermochill-MCR320 comparison. It's widely circulated, and the guy who did it is well-regarded, but even Thermochill's own test data doesn't quite agree with it. If you check out the thermal dissipation graphs towards the bottom of the link, you can see that the MCR-220 isn't actually that far below the PA120.2, even with 1200rpm fans.

Yes I was considering it, but it was only an afterthought once I found that the PA 120.1 wouldn't plug in quite the way I wanted. You suggested (and that table pretty well cemented the case) that two 120.1 wouldn't produce better results than the single 320 so I figured I'd leave that alone.

I'm pretty well convinced that I'm going to mount the single in the front with a push/pull and order myself a Fuzion V2. With that in mind, I'm going to put the single on a shelf until I get the V2 in rather than re-doing the loop twice. :)

[Varroa]

Originally Posted by sswilson

This is the image you're talking about right?

http://www.hardwarecanucks.com/forum/49113-post30.html

Sorry I missed this one guys but yes I can confirm this is a thermochill on the back of my case, it is cooling my CPU alone. The 2x120 uptop is cooling my NB and my 2900XT using a coolance full coverage GPU block.