Go Back   Hardware Canucks > CASES & COOLING > Water Cooling

    
Reply
 
LinkBack Thread Tools Display Modes
  #61 (permalink)  
Old May 14, 2008, 11:49 PM
Dashock's Avatar
Hall Of Fame
F@H
 
Join Date: Nov 2007
Location: Toronto
Posts: 1,938
Default

You make a good point my bad! Its just the excitement of a new project and all these ideas i never knew were possible untill now! Looking thru the web it looks like with the Thermaltake Icage i can still put my grill/filtermesh on top of it i was worried i couldnt cause it stops dust from going in. Too bad i cannot use the sound dampening things that Noctua gave me on the rad instead of screws.
__________________
Intel Xeon E3110 @ 3.0ghz
XFX 8800 GT Alpha Dog Edition
Asus P5Q-E
Mushkin Ascent Redline 8000 4gb DDR2 @ 1066 5-5-5-15 2.05v
OCZ 600W GameXstream
Seagate 7200.11 500gb
Seagate 7200.10 320gb
Antec Spot Cool
Logitech X-230
Samsung 32" 720P HDTV



Coolermaster Cosmos S/
Swiftech Mcp655/ MCR-320-QP/ 6X Noctua NF-P12'S/ Swiftech Apogee GT/ Swiftech Mcw-60/ Swiftech Micro-Res.


Last edited by Dashock; May 15, 2008 at 12:56 AM.
Reply With Quote
  #62 (permalink)  
Old May 15, 2008, 05:11 AM
magictorch's Avatar
Hall Of Fame
F@H
 
Join Date: Apr 2007
Location: Annapolis Valley, NS
Posts: 1,836
Default Noise damper

You can still use the noise damper attachments.

Just cut the tips off and make a hole for the screw to go through..then put the dampers between the rad and fan when screwing down.
__________________
White Night:: i7920 (4ghz), Rampage III extreme (A1), Mushkin XP 1600 (9,9,9,24),SLI480., white MM horizon.
CPU: Feser 220 int.|Apogee GTZ|S.Res.rev2| MCP655.

GPU: PA120.3|S.Res.rev2|2x EK FC blocks| MCP655.
Reply With Quote
  #63 (permalink)  
Old May 15, 2008, 11:24 AM
Dashock's Avatar
Hall Of Fame
F@H
 
Join Date: Nov 2007
Location: Toronto
Posts: 1,938
Default

sounds interesting ill try it out. Well a new development as occured i was trying to figure out cable management ways and i noticed i can take the Hard drive bay out in the bottom of my case so i will go with a 5.25 i hope someone has bought the Thermaltake ICAGE before so as to i can feel comforted to the fact that this is a good quality product if anyone else has any other recommendation of the bays offcourse i will be using a fan to cool so keep that in mind.


And i hooked up the Noctua fan at 1300 it pushes air as much as my Tri-Cool at medium and pretty silent but im wondering if this will cause my temps to go up i mean with the Tri-cools i atleast have a setting to go to max and even though the sound is horrible at the full speed it pushes out an amazing amount of air but i dont know how good Antec Tri-Cools would be with my Swiftech Mcr-220 with intergrated reservoir.
__________________
Intel Xeon E3110 @ 3.0ghz
XFX 8800 GT Alpha Dog Edition
Asus P5Q-E
Mushkin Ascent Redline 8000 4gb DDR2 @ 1066 5-5-5-15 2.05v
OCZ 600W GameXstream
Seagate 7200.11 500gb
Seagate 7200.10 320gb
Antec Spot Cool
Logitech X-230
Samsung 32" 720P HDTV



Coolermaster Cosmos S/
Swiftech Mcp655/ MCR-320-QP/ 6X Noctua NF-P12'S/ Swiftech Apogee GT/ Swiftech Mcw-60/ Swiftech Micro-Res.


Last edited by Dashock; May 15, 2008 at 03:40 PM.
Reply With Quote
Reply


Thread Tools
Display Modes