Hardware Canucks

Hardware Canucks (http://www.hardwarecanucks.com/forum/)
-   Water Cooling (http://www.hardwarecanucks.com/forum/water-cooling/)
-   -   Are these fittings any good? (http://www.hardwarecanucks.com/forum/water-cooling/59379-these-fittings-any-good.html)

Evil Genius Jr. January 27, 2013 06:38 PM

Are these fittings any good?
ModMyToys Carbon Fiber Enhanced Compression Fittings, 1/2" x 3/4" Single - Matte Black Products Model: MMT-CFF-MB-BK-1234-1 [MMT-CFF-MB-BK-1234-1] : Performance-PCs.com, ... sleeve it and they will come

Seems pretty awesome but if the quality is terrible then not so much. Anybody used these or heard anything about them?

1V4N January 27, 2013 08:22 PM

the copper versions were recently reviewed here

to summarize:

"While I may be an old-school barb and clamp user, and I have had some issues with other compression fittings, the monsoon free center design is really a step above the rest in terms of eliminating or reducing the common problems associated with most compression fittings. The problem of loosing your finger tips and never quite getting things as tight as you would like are gone, you now have a tool to do the work for you and you have a very sleek and smooth look that is unmatched. Iíve been generally very impressed with these monsoon compression fittings and suggest you give one or two a try before making a decision on what to build your system from. With fittings, I would always suggest trying one or two yourself first as you do kind of buy into a style and itís worth making sure with one barb sample first. The monsoon compression fitting is the first to really change up and clean up the looks of compression fittings and they have also improved several areas of performance and improved the user experience while doing so. I recommend them very highly."

Evil Genius Jr. January 28, 2013 05:17 AM

Alright cool, thanks!

xmanrigger February 18, 2013 05:01 PM

I am a big fan of Bitspower compressions and fittings. I have yet to have a compression leak or even remotely pull apart. I have had such great success with BP fittings, I havent used any other brands.

Zer0 February 20, 2013 04:06 PM

I use Monsoon compressions in my ITX build (ModMyToys is PPCS's in-house brand that is manufactured by Monsoon). They work fine but I do prefer the more expensive Bitspower ones though. The wrench is a little finicky because the tubing rubs against it which makes it hard to turn.



xmanrigger February 23, 2013 09:58 AM

Nice build Zer0. Simple and neat.

Zer0 February 23, 2013 11:53 AM

Thanks. :thumb:

ZZLEE February 23, 2013 12:13 PM

the tube cutter helps allot to stiaght cuts that make plumbing easier.

Zer0 February 23, 2013 01:29 PM


Originally Posted by ZZLEE (Post 692423)
the tube cutter helps allot to stiaght cuts that make plumbing easier.

Yea, I used to use a box cutter, what a b#$^@ that was lol. I could never get it perfectly straight.

All times are GMT -7. The time now is 04:33 PM.