Switching Reservoir Help needed thanks
 

Ok here we go so if i am wanting to switch from the Dual 5.25" Bay Reservoir to the
Tube Reservoir what all will i need just so i know better to ask then buy first ask later
This is the Reservoir i have now below
STEP ONE RAYSTORM KIT BASE - DUAL BAY D5

i am wanting to switch from my Dual 5.25" Bay Reservoir to this one

Bitspower D5 Pump Top (Acetal Version)

I know i will need a pump top but if someone could help me out it would be great

things I have

The D5 pump
New HEATKILLER CPU Kuhler Rev3.0 1366/2011 Black Nickel
compression fittings 7/16″ ID, 5/8″ OD
Clear Tubing
EX360 Radiator with 3 Triebwerk 55mm Optimized Radiator Fans

everything going into a Corsair 800D case

I'm confused as to what you're asking. It looks like you have chosen your pump top already?

as Pabz0r545 says above me you seem to already have the pump the Dual / Single D5 Top Upgrade Kit 150 (Black POM Cap) that your link goes to looks like an addon for the pump you are using the only thing I can think of that you need to check is that the hose that originally went to the "Inlet" of your 5.25 bay res is long enough to reach the new res and that the outlet hose from your 5.25 res is also long enough to reach where ever it was going. other then that you should be ok

http://ep.yimg.com/ca/I/sidewinderco..._2227_18173385getting rid of the dual bay to make room for burners yah

just need longer hosing and are fittings same hose size

ok getting confused here i have the

DazMode STORM D5 Strong pump

now i want to go to tube Reservoir

Now my question is what are the parts i need to do this

As of now my pump is in a dual bay res

http://i20.photobucket.com/albums/b2...loded-view.gif

the ring is threaded turn counter-clockwise to loosen pump from body, be careful of the 0-ring

this kit (what KaptCrunch is showing): https://www.dazmode.com/store/produc...n_tinted_tube/

plus maybe one of these, optional: https://www.dazmode.com/store/produc...g_kit_-_black/