Need to update my Watercooling

[r0k0]

ok... well then 2x 240's rad good ? still the Spin Bay is a dual loop res anyways... might as well make it that way.. unless i can fing a real nice black EK dual bay res

First post updated

[AmuseMe]

Personally, I hate bay-reservoirs. They look like butt. I prefer the front of my case to look clean, sleek, and uniform. I can't stand when people have two DVD drives, fan controllers, bay reservoirs, etc. etc. It just looks cluttered...
A good tube reservoir, with two pumps

[r0k0]

no space for a tube reservoir

also edited the OP, single loop bay res and 1 mcp 355 pump

[r0k0]

ok so i've watch dazmode review on pump.. just saw the replacement tops of the pump

D5 has more flow rate but less pressure.. DDC has less Flow but more pressure.. ? which is best for a single loop ?

also how do i combine a DDC or D5 to a top mount res ?

its just a question but i've got a DDC pump with Acetal top that i've planned on my build after the video Daz made and thinking of using the bay res + making a hole in my 5.25 bottem bay and putting the tube threw it and mount my pump underneath the 5.25 for less clutter

This is a layout on paint i've made to show what i what to do



Uploaded with ImageShack.us

[kosmic]

Good decision with a single loop.

For the loop order I would go like this:

Reservoir-pump-cpu-gpu-rad1-rad2-reservoir

My loop for exemple:

Reservoir-pump1-pump2-rad1(3x120)-cpu-gpu1-gpu2-rad2(3x140)-reservoir

Good luck with the build and show us some pics once completed.

[r0k0]

Are these fans good with the static pressure they are showing ?

whats a good static pressure recommended ?

XSPC RASA RAYSTORM KIT SLEEVED FAN - 1650RPM 63CFM 29 dBa [RDL1225S] - $9.99 : DazMode, The Best Canadian PC Watercooling and Modding Store!

[r3v07ut10n]

i believe Scythe GT-15 as the most recommend low rpm fan.

Scythe Gentle Typhoon 1850RPM 59CFM @ 28db Fan Scythe Gentle Typhoon 1850RPM 59CFM @ 28db Fan [D1225C12B5AP-15] - $22.49 : DazMode, The Best Canadian PC Watercooling and Modding Store!

[r0k0]

whats the recommended static pressure flow ?

[Adzsask]

Originally Posted by r0k0

whats the recommended static pressure flow ?

I wouldn't go much lower then 50CFM for a rad, I love GT AP-15's they are about the best fan that isn't loud at stock speeds.

[kosmic]

Originally Posted by r0k0

whats the recommended static pressure flow ?

A good read.

R6 120mm Fan Testing on an MCR120 Radiator Round 6 Summary « martinsliquidlab.org