Is it possible...

[Hacksaw907]

... to have two different colours for liquid and tubing, and have both show their colours with UV?

[KaptCrunch]

yes in separate loops meaning 2 of everthing with using 2 VU fluid colours

but if using the different UV tubing your only using 1 of loop things

[Hacksaw907]

Originally Posted by KaptCrunch

yes in separate loops meaning 2 of everthing with using 2 VU fluid colours

but if using the different UV tubing your only using 1 of loop things

Well, what I was thinking of doing is having UV orange tubing, but with UV blue liquid flowing through it. In which case, the surround edges of the tubing would glow orange, but a bright blue would theoretically be showing in the center of the tubing. They'll both be in one loop, but two different UV colours that would (hopefully) show.

[SugarJ]

You'll probably only see the tubing color.

[Hacksaw907]

Originally Posted by SugarJ

You'll probably only see the tubing color.

Damn Oh well, back to the drawing board, I guess.

[Dragonstongue]

Unless you had a tube in a tube, then you might possibly see the different coloring, but one would have to be much more reactive then the other. Maybe they make a chameleon type UV reactive that can change depending on the light being shone into it?

[Hacksaw907]

Originally Posted by Dragonstongue

Unless you had a tube in a tube, then you might possibly see the different coloring, but one would have to be much more reactive then the other. Maybe they make a chameleon type UV reactive that can change depending on the light being shone into it?

Nah, I don't think there is. I've been looking high and low for information on it, but seeing how scarce it is, I'm assuming it's not doable.

In any case, I think I know what I'm going to do: Strategically put orange LED's in the forefront of the case to shine off the tubing, and have UV lights in the background to cause the UV blue liquid to glow. Not sure how well it'll work, but I think that's the best option I have to get something similar to what I want. Worse comes to worst, I'll just ditch one of the two LED's and call it a day

[DenisS]

I have seen a case where someone used a clear uv reactive tuping with green liquid, thanks to uv light it looked like blue on the outside and green inside. Maybe you can do something like that?

the tuping was clear- blue uv reactive.

[Hacksaw907]

Originally Posted by DenisS

I have seen a case where someone used a clear uv reactive tuping with green liquid, thanks to uv light it looked like blue on the outside and green inside. Maybe you can do something like that?

the tuping was clear- blue uv reactive.

Interesting... Just checked it out. Seems Daz has some 1/2ID clear/UV blue tubing. I was hoping for the tubing to be orange and the liquid blue, but I guess this is a good compromise if it works.

Thanks for the tip