Hardware Canucks

Hardware Canucks (http://www.hardwarecanucks.com/forum/)
-   Water Cooling (http://www.hardwarecanucks.com/forum/water-cooling/)
-   -   SLI Water Cooling. (http://www.hardwarecanucks.com/forum/water-cooling/5143-sli-water-cooling.html)

BALISTX March 18, 2008 02:56 PM

SLI Water Cooling.
What parts or prefab kit would one recommend for a SLI water cooling setup? Looking at spending no more than $250-$300

Cptn Vortex March 18, 2008 05:01 PM

Hmmmm. CPU too? The Swiftech H20-220 Apex ultra + kit. It can be had for about $275 when on sale, and with that add a second GPU block, about $40 Extra.

3.0charlie March 18, 2008 05:35 PM

I agree. Great kit.

BALISTX March 18, 2008 07:35 PM

Will those GPU waterblocks work with the 9600 GT? I was thinking about maybe doing a two rad setup. One Dual fan for the GPUs and a single for the CPU. I have a Coolermaster CM690 and was thinking about putting the dual rad up top where the two top 120mm exhaust fans are and the single on the back where the 120mm exhaust fan is.

Cptn Vortex March 18, 2008 08:12 PM

Fitting a rad up there will be tight.... not much room.

Yes, I am pretty sure they work with the 9600GT, as it is essentially the same as a 8800GT, which uses the same mounting as the 7900 etc... all compatible.

lcdguy March 19, 2008 10:02 AM

if it were me i would get 2 D0tek Fuzion gpu blocks, ram sinks, mcp355 or 655 pump, 1/2id tubing thermalchill rad 120.1 or 120.2. but thats just me.

All times are GMT -7. The time now is 03:00 PM.