Go Back   Hardware Canucks > CASES & COOLING > Water Cooling

    
Reply
 
LinkBack Thread Tools Display Modes
  #11 (permalink)  
Old July 9, 2011, 02:09 AM
Top Prospect
 
Join Date: Mar 2011
Location: Toronto
Posts: 83

My System Specs

Default

Quote:
Originally Posted by KaptCrunch View Post


yes and the hose not pushed all the on the barb:(


Asad_A203 how the rad is mounted it's a big air trap better with hoses on top
The hose was adjusted after I took that pic, it is snug on the barb now (it is also clamped so there is no way the hose is coming off, the only way it is going to leak is from a stress crack but the tubing seems too soft for that to happen).

Hmm, I am not sure if I can mount the radiator the other way as the rad is larger than my case and it will end up blocking all my inputs. I still have one 5870 on air that will be exhausting out the back too whereas my CPU is idle 99% of the time and generates much less heat than what that 5870 will be pumping out.


I think I understand what you are saying though about the air trap, it took a long time to bleed out all the air bubbles after I primed the pump. Most of it is out now though.
Reply With Quote
  #12 (permalink)  
Old July 9, 2011, 06:00 PM
Prolab's Avatar
MVP
F@H
 
Join Date: Jul 2010
Location: Mississauga
Posts: 485

My System Specs

Default

Finally, good job!

I had my cap off my reservoir for a few days and my pump on speed 2. Got rid most of the bubbles that way.
__________________

Gaming Rig:

-Swiffy MCP35x X2 & 240 Rad, (2) 480 EX XSPC Rad, Heatkiller rev. 3.0, i7 3930k @ 4.7 Ghz, 16 GB G.SKILL F3, Asus Rampage IV Extreme, XFX R9 290 w/ XPSC WB, Crucial M4 128GB & 240 GB Intel 530, (5) 3 TB Toshiba Drive, Corsair AX1200, Win 7 Ultimate 64-bit

HTPC Rig:

-AMD 1100T, Gigabyte UD5, 16 GB G.Skill RAM, Asus 650ti Boost, 500 GB WD Black, (5) 2 TB WD Green, (1) 3 TB Toshiba HD, (1) 2 TB Samsung F4, Fractal Design R3, Antec 650 watt PS, Win 7 Ultimate 64-bit
Reply With Quote
  #13 (permalink)  
Old July 10, 2011, 02:46 AM
Top Prospect
 
Join Date: Mar 2011
Location: Toronto
Posts: 83

My System Specs

Default

Quote:
Originally Posted by Prolab View Post
Finally, good job!

I had my cap off my reservoir for a few days and my pump on speed 2. Got rid most of the bubbles that way.
Thanks, will keep that in mind . I will take that cap back off my reservoir, haha.
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Antec Minuet 350 Build MaxPayne Case Mods, Worklog & Gallery 12 November 28, 2013 01:09 PM
CM Storm Scout vs Antec 902 rapmaster Cases 4 June 21, 2009 11:15 PM
antec 902 and the geargrip harness? dmccaulley Cases 0 June 21, 2009 11:09 PM
Antec 900 | E8400 build Mr. Gruntsworthy New Builds 43 September 26, 2008 04:55 PM
Ftw Antec For The Next Build!!!!!! omgwtf Cases 13 May 18, 2008 04:31 AM