Go Back   Hardware Canucks > CASES & COOLING > Water Cooling

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old February 2, 2011, 10:37 PM
matari's Avatar
Top Prospect
 
Join Date: Dec 2010
Posts: 126
Question Will this work with a MCP 355 w/XSPC top?

ttp://www.koolance.com/water-coolin...roduct_id=1058

Just wondering if this will work with MCP 355 w/XSPC top
Reply With Quote
  #2 (permalink)  
Old February 2, 2011, 10:45 PM
MVP
 
Join Date: Oct 2010
Location: Hamilton, Ontario
Posts: 271

My System Specs

Default

Your page gives me a product not found.. probably cause the URL is not complete in your post.
Reply With Quote
  #3 (permalink)  
Old February 2, 2011, 11:07 PM
lowfat's Avatar
Moderator
 
Join Date: Feb 2007
Location: Grande Prairie, AB
Posts: 8,119

My System Specs

Default

Answered you on XS. It should work. You will need to cut the feet off the pump. Also make sure that your XSPC top uses M4 screws.
__________________
Mael
Big Lian Li
Forever Alone
Reply With Quote
  #4 (permalink)  
Old February 3, 2011, 12:10 AM
matari's Avatar
Top Prospect
 
Join Date: Dec 2010
Posts: 126
Default

I used my iphone, sorry for the busted link. Here is the correct one.

Heat Sink for PMP-400 Pump - Water cooling systems, pc liquid cooling kit, cpu, video card, hard drive

The question was answered on the XS forum. Sorry for the double post, but some of the people on the XS forums needs to stop the rude comments. I like this forum, it is quiet and does not have as many rude people. The only thing I do not like is when people try to sell you stuff. Makes me feel like I am playing an mmo with gold farmers spamming you.

Thanks for your help.
Reply With Quote
  #5 (permalink)  
Old February 3, 2011, 04:38 AM
Prolab's Avatar
MVP
F@H
 
Join Date: Jul 2010
Location: Mississauga
Posts: 485

My System Specs

Default

Fyi, you can get this from Daz to save you ups shipping

Heat Sink for PMP-400 (DDC) Pump Heat Sink for PMP-400 (DDC) Pump [HTS-PMP400] - $39.99 : DazMode, Canadian PC Water Cooling and Modding Store
__________________
Gaming Rig:
-Swiffy MCP35x X2, (2) Aphacool UT60 480 rad, Heatkiller rev. 3.0, i7 3930k @ 4.6 Ghz, 16 GB G.SKILL F3, Asus Rampage IV Extreme, XFX R9 290 w/ XPSC WB, Crucial M4 128GB & 240 GB Intel 530, (5) 3 TB Toshiba Drive, Corsair AX1200, Win 7 Ult 64-bit

HTPC Rig:
-G3258 @ Stock, Asrock Z97 Pro 4, Gigabyte 270x, 500 GB WD Black, (5) 2 TB WD Green, (1) 3 TB Toshiba HD, (1) 2 TB Samsung F4, Fractal Design R3, Corsair HX620 PS, Win 7 Ult 64-bit
Reply With Quote
  #6 (permalink)  
Old February 3, 2011, 08:06 AM
JD's Avatar
JD JD is offline
Moderator
F@H
 
Join Date: Jul 2007
Location: Toronto, ON
Posts: 6,969

My System Specs

Default

I have this on my DDC3.25. You should remove the plastic stock casing to fit the heatsink and metal body properly. I'm not sure if you can do that with the MCP355 though...

Pictures should be self-explanatory.


Last edited by JD; February 3, 2011 at 08:52 AM.
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
How To: Turn your Laing DDC 3.1/ MCP 350 into a Lain DDC 3.2/ MCP 355 AmuseMe Guides & How-to's 7 April 1, 2011 09:55 PM
[FS] MCP 655 + MCP 355 XSPC RES TOP + MCR 420 + MCR 220 X 2 + 9800 GX2 matsta31 Buy/Sell & Trade 40 April 1, 2010 07:37 AM
[WTB] MCP-350/355 Soultribunal Buy/Sell & Trade 10 December 25, 2009 11:35 AM
[WTB] XSPC res top + DDC 355 rai_polo Buy/Sell & Trade 16 November 4, 2009 06:40 AM
[WTB] swiftech 350/355 pump + top, ramsinks upsidedown Buy/Sell & Trade 2 June 12, 2009 06:12 PM