Go Back   Hardware Canucks > CASES & COOLING > Water Cooling
Reload this Page HeatKiller 3.0 @ 87C WTF?!
Mark Forums Read
Media Gallery Register Members List LAN Calendar Search Today's Posts

       
Reply
Page 1 of 8 1 2 3 4 5 6 7 8 >
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old April 18, 2010, 09:32 AM
MVP
  
Join Date: Oct 2008
Location: Montreal
Posts: 379
Default HeatKiller 3.0 @ 87C WTF?!
I setup a loop, Microresv2 -> MCP655 -> 240mm radiator -> HeatKiller 1156 -> Microres.

Now my i7 860 is @ 4.0 (200x20)

vCore +0.19750v
VTT 1.355v

When the cpu is loaded the temps reach 92C, what the feck eh?

Advice?

__________________
heat

rfd

hofo
Last edited by anabioz; April 18, 2010 at 10:03 AM.
Reply With Quote
  #2 (permalink)  
Old April 18, 2010, 09:34 AM
Dazmode's Avatar
Hall Of Fame
  
Join Date: Mar 2009
Location: Oakville
Posts: 1,632
Default
Do you have any coolant flow?
__________________
Venom Build: Caselabs SMH10, 3930k, 2x GTX680, MSI BigBangII, 8x Dominators, 2 x D5 , Quad Rad, Adaptec 7805, 4x WD Red, 2x Intel 510, Aquaero 5, 11x GT
Silent Sniper Build: Final Video, XSPC H1 Cube case, Supreme HF, 2xGTX470, GA G1 Sniper, Dominators, 2x Triple rad, Triebwerk Fans, 2x D5, Custom Sleeving
Orange Build: Final Video
HTPC Build: Final Video
Reply With Quote
  #3 (permalink)  
Old April 18, 2010, 09:39 AM
Sushi Warrior's Avatar
Hall Of Fame
F@H
  
Join Date: Aug 2009
Location: Grimsby, Ontario
Posts: 1,485

My System Specs

Default
Is the MCP655 the controllable one? If so is it set at setting 1? Did you leave the plastic on the block base? Did you mount the HK correctly? It is very tricky to mount properly.
__________________
||EK Supreme LT Nickel||MCP355/EK X-TOPV2||EK150 M-O res||MCR220/White||NZXT FN120RB/FN140RB||
Project|Oroborous by NZXT and MNPC
Quote:
You're half way through some post and you realize it's from some retard who types like he's got an array of dog dicks for fingers
Reply With Quote
  #4 (permalink)  
Old April 18, 2010, 09:46 AM
MVP
  
Join Date: Oct 2008
Location: Montreal
Posts: 379
Default
Feaser non conductive one.
__________________
heat

rfd

hofo
Reply With Quote
  #5 (permalink)  
Old April 18, 2010, 09:47 AM
MVP
  
Join Date: Oct 2008
Location: Montreal
Posts: 379
Default
I mounted HK 3.0 1156 (no plastic obviously) Arctic Silver paste, but my screws are 11.1mm (instead of 18.7mm mentioned by the manufacturer).

I need assistance :(
__________________
heat

rfd

hofo
Reply With Quote
  #6 (permalink)  
Old April 18, 2010, 09:49 AM
Jackquelegs's Avatar
Hall Of Fame
F@H
  
Join Date: Jan 2008
Location: Burnaby, BC
Posts: 2,588

My System Specs

Default
1. Check coolant flow
2. Show us your setup
3. recheck mounting. Make sure it's mounted with good pressure.
__________________
Iapetos
Intel Core i7 930 D0 4.2ghz, Corsair XMS3 6X2GB DDR3-1600 CL 8-8-8-24, Xfire HD5870, Intel X-25M 34nm 80gb, Enermax Revolution85+ 1050W, Xonar D2X

Zephyranthes
E8400 4.0ghz, XFX 780i, Mushkin XP2 PC-6400, Antec Earthwatts 750W
Reply With Quote
  #7 (permalink)  
Old April 18, 2010, 09:50 AM
Top Prospect
F@H
  
Join Date: Oct 2008
Location: London
Posts: 173
Default
I'll send you a PM so this thread doesn't get long in the tooth.
__________________
Ivy Bridge 3770K @ 5.0 Ghz (delidded)
Asus P8Z77 WS
16GB Gskil DDR3-2400
EVGA GTX 670 FTW (x2) SLi Surround | Dell 2709W (x3)
OCZ Vertex 3/Corsair Force GT Raid 0 480Gb - Windows 7 x64 SP1
OCZ Vertex 120Gb SSD Cache for Seagate 2Tb - File backup
Corsair Obsidian 800D | Enermax Revolution85+ 1050W
HeatKiller 3.0 | EK GTX680 WB (x2) | TFC Exchanger Quad Rad | (x4) Scythe Gentle Typhoon |Swiftech MCP655 | EK drive bay Res.
Reply With Quote
  #8 (permalink)  
Old April 18, 2010, 09:50 AM
MVP
  
Join Date: Oct 2008
Location: Montreal
Posts: 379
Default
MCP655 arrow points @ 5
__________________
heat

rfd

hofo
Reply With Quote
  #9 (permalink)  
Old April 18, 2010, 09:55 AM
MpG's Avatar
MpG MpG is offline
Hall Of Fame
  
Join Date: Aug 2007
Location: Kitchener, ON
Posts: 3,122

My System Specs

Default
What's your thermal paste spread look like? Unless you have an abnormally hot chip (and they do exist), your situation sounds a lot like a bad mount. The water block isn't pressing down on any motherboard components, is it? Besides, the CPU, I mean?
__________________
i7 2600K | ASUS Maximus IV GENE-Z | GTX Titan | Corsair DDR3-2133
Reply With Quote
  #10 (permalink)  
Old April 18, 2010, 10:02 AM
MVP
  
Join Date: Oct 2008
Location: Montreal
Posts: 379
Default
__________________
heat

rfd

hofo
Reply With Quote
Reply
Page 1 of 8 1 2 3 4 5 6 7 8 >


« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
HeatKiller 3.0 Mounting? AmuseMe Water Cooling 12 October 11, 2010 09:21 PM
Heatkiller 3.0 Apollo4g Water Cooling 88 January 30, 2010 03:21 AM
Where to BUY HeatKiller Products??? Chromey Water Cooling 11 January 25, 2010 09:27 PM
Heatkiller D5 Pump Top Technokat Water Cooling 7 January 18, 2010 06:07 PM
Heatkiller + Backplate JD Water Cooling 5 January 3, 2010 07:12 PM