Go Back   Hardware Canucks > CASES & COOLING > Water Cooling

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old February 18, 2010, 05:01 PM
Allstar
 
Join Date: Oct 2008
Location: Acton, Ont
Posts: 878
Default Home Made Res...

So I thought i would try something new...

Please give me your thoughts.
Those Are 1/2" barbs











Reply With Quote
  #2 (permalink)  
Old February 18, 2010, 05:13 PM
AmuseMe's Avatar
Hall Of Fame
 
Join Date: Apr 2009
Location: Lloydminster & Saskatoon
Posts: 1,587
Default

Few questions for you Chromey: Threaded holes? What is it made from? And what is bonding it?
__________________
DEAD CA$H
Reply With Quote
  #3 (permalink)  
Old February 18, 2010, 05:39 PM
Allstar
 
Join Date: Oct 2008
Location: Acton, Ont
Posts: 878
Default

Bonded with 2 in 1 Made By Home Bond.

Front holes are drilled, And i glued the barbs in.

The top hole was tapped.
Reply With Quote
  #4 (permalink)  
Old February 18, 2010, 07:18 PM
gingerbee's Avatar
Hall Of Fame
F@H
 
Join Date: Jan 2009
Location: Orillia, Ontario
Posts: 6,827

My System Specs

Default

looks pretty good to me.
__________________
Fav quote "One should strive to achieve; not sit in bitter regret." Ronin Harris
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Home made i7 water block Lazypixel Water Cooling 30 March 11, 2010 06:57 AM
home made gpu water block Lazypixel Water Cooling 24 July 11, 2009 07:50 PM
can I use an old plastic bottle for a res? Shadowmeph Water Cooling 5 May 3, 2009 06:41 PM
Best GPU for 1650x1080 res? Inik Video Cards 18 September 22, 2008 04:21 PM