Hardware Canucks

Hardware Canucks (http://www.hardwarecanucks.com/forum/)
-   Water Cooling (http://www.hardwarecanucks.com/forum/water-cooling/)
-   -   Help Me Choose My Fittings Please. (http://www.hardwarecanucks.com/forum/water-cooling/26160-help-me-choose-my-fittings-please.html)

JORD4N December 2, 2009 06:15 PM

Help Me Choose My Fittings Please.
 
Its going in a Corsair 800D Case with Evga sli le mobo, 12G Corsair Dominator 2000mhz with the i7 920 @ 4.5ghz Currently at 3.9 with the Corsair h50.
When do i plan to buy this ? as soon as i get a resonse with the barbs i need to buy http://forum.watercoolinguk.co.uk/im.../icon_wink.gif
Note: Ill be getting a diffrent Cpu block so ignore the fact that there are 2x 45 and x2 straight fittings for the cpu as ill need them.

http://www.watercoolinguk.co.uk/cata...oducts_id=1487
http://www.watercoolinguk.co.uk/cata...oducts_id=1126
http://www.watercoolinguk.co.uk/cata...roducts_id=473
http://www.watercoolinguk.co.uk/cata...roducts_id=346
http://www.watercoolinguk.co.uk/cata...oducts_id=2060
http://www.watercoolinguk.co.uk/cata...roducts_id=965
http://www.watercoolinguk.co.uk/cata...oducts_id=1646

Barbs Are These Correct ?

x1 - WaterCooling UK: 1/4" BSPP - 3/8" ID - 5/8" OD 90 Degree Rotary Compression
x5 - WaterCooling UK: 1/4" BSPP Male Rotary - 45 Degree Female 1/4" BSPP
x9 - WaterCooling UK: 1/4" BSPP - 3/8" ID - 5/8" OD Compression Fitting

My graphic design :rofl:

http://img259.imageshack.us/img259/8...rbsdetaild.png

JORD4N December 4, 2009 08:59 PM

:dots:

sascwatch December 5, 2009 05:21 AM

That should be enough fittings for that setup, I have always thought to stay away from 90* angle fittings, but I'm new to watercooling aswell so maybe they don't have as much of an effect as I think.

With my 800D i used 5 rotaries and the rest were all straight compression fittings.

KaptCrunch December 5, 2009 09:00 AM

yes its a no no to have elbow on the pump inlet

Lpfan4ever December 5, 2009 11:11 AM

Take another look at the radiator fittings as the Thermochill radiators use G3/8 fittings and not the G1/4 you have linked. Also, 90* fitting is a big no-no on the pump inlet, as stated before.
As well, that 5 1/4" bay reservoir is out of stock, and I really don't like trying to fill bay reservoirs.


All times are GMT -7. The time now is 06:50 AM.