Go Back   Hardware Canucks > CASES & COOLING > Water Cooling

    
Reply
 
LinkBack Thread Tools Display Modes
  #11 (permalink)  
Old September 15, 2007, 07:23 PM
Supergrover's Avatar
Hall Of Fame
F@H
 
Join Date: Dec 2006
Location: Okanagan Falls, British Columbia
Posts: 4,246

My System Specs

Default

Well I decieded to not go with a kit, just ordered this:

Thermochill Pa 120.2 Dual 120MM Fan Water Cooling Radiator *No Barbs*

Swiftech Smartcoils 625 Blue

Magicool Thermochill Mounting Screws 3.5 X 40MM (4 Screws) x2

Thermochill FG120.2 Fan Grill for PA120.2 Radiator

Danger Den 1/2IN Polyethylene Barb Fittings 3/8 NPT (Pair)


NCIX is out of

Thermochill 1/2IN Chrome Plated Barb Fitting G3/8 Threads *Single Barb* for now

Awaiting Order:

Tubing: So what do I want here say 5' of Tygon R-3603 1/2IN ID 3/4IN OD Tubing 5 Feet
for the bends and what else is good for straight runs?

WB: Pretty sure about going with the Fuzion but is it worth it to go with Water Accelerator Nozzle Kit for D-TEK Fuzion CPU Block
?

Pump: Swiftech MCP655 12V Industrial Water Cooling Pump 1/2IN Barbs

Reservoir: Still up in the air about eithier Swiftech MCRES-MICRO Clear HI-FLOW Water Cooling Reservoir 3/8IN & 1/2IN Barb Fittings or Ek Water Blocks Ek Multioption Res 250 REV.2 G1/4
leaning towards the EK.

Anything I am missing besides clamps and hydrx?
lol And fans
__________________
R.I.P.

Quote:
Originally Posted by 3.0charlie View Post
My knuckles are bleeding from fishing through walls a new CAT6 network cable... I found fresh, untapped electrical outlets...
"It's all in the Reflexes"-Jack Burton
Reply With Quote
  #12 (permalink)  
Old September 15, 2007, 07:32 PM
sswilson's Avatar
Moderator
F@H
 
Join Date: Dec 2006
Location: Moncton NB
Posts: 14,474

My System Specs

Default

Heh.... I was just about to say "fans"...... :)

I also like the look of the EK res, but ultimately cheaped out and went with the swiftech. Have a good look at the orientation of the barbs on each one and visualize how it's going to fit into the loop once it's in your case.

That fan grill is a pretty sweet looking piece of kit!!!!

Glad to see that you're finally coming over to the dark side.... do you think Miso's been slipping something into the water supply??? :)
__________________
MSI Z87I Gaming AC / i5 4670K / 2X 4G Gskill 1866 DDR3 / XFX XTR 750 / EVGA GTX 680 SC+ 2GB / Intel DC S3700 200G / random 160G Sata HDD
Inwin 904 / Swiftech MCP655-b / Alphacool NexXxos XT45 120 Rad / 2X Scythe GT AP-15 / EK Supreme HF / Dell UltraSharp U2412M

Asrock AM1H-ITX / AM1 Athlon 5350 / 2X4G Gskill PC3-14900 / Intel 6235 Wi-Fi / 90W Targus Power Brick / 320G Seagate Momentus / Mini-Box M350 / 1X 22" Dell IPS / 1X 22" HP
Reply With Quote
  #13 (permalink)  
Old September 15, 2007, 07:39 PM
Supergrover's Avatar
Hall Of Fame
F@H
 
Join Date: Dec 2006
Location: Okanagan Falls, British Columbia
Posts: 4,246

My System Specs

Default

Quote:
Originally Posted by sswilson View Post

Glad to see that you're finally coming over to the dark side.... do you think Miso's been slipping something into the water supply??? :)
Definitely

No after the Water is done, a new desk, then it's hopefully Quad time
For me it going to be a whole new build, Mobo/CPU/RAM/GFXcard and am tired of limits of air,plus it all swaps over
__________________
R.I.P.

Quote:
Originally Posted by 3.0charlie View Post
My knuckles are bleeding from fishing through walls a new CAT6 network cable... I found fresh, untapped electrical outlets...
"It's all in the Reflexes"-Jack Burton
Reply With Quote
  #14 (permalink)  
Old September 15, 2007, 07:47 PM
3.0charlie's Avatar
3.0 "I kill SR2's" Charlie
F@H
 
Join Date: May 2007
Location: Laval, QC
Posts: 9,627

My System Specs

Default

Don't go cheap on the Tygon - nothing worse than missing a few inches to close the loop... figure out your routing, and add 25% in lenght. That's what I do.
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
suggestion for a intel build ebdoradz CPU's and Motherboards 9 February 13, 2008 08:43 AM
Suggestion qwerty Suggestions & Feedback 5 October 16, 2007 02:22 PM
ram suggestion skyline510 RAM 9 September 15, 2007 09:55 AM
First build. l0ck Troubleshooting 15 July 25, 2007 04:24 AM