Really weird SLI issue...
As you may have seen, I've aquired a couple of 660ti's and have thrown'm together in SLI.
I have, however, encountered a problem. When playing BF3, (have yet to test other games) in full screen, with SLI enabled, (both gpus go to 80-99%) the screen has this horrible flicker and purple overlay. However in windowed mode, BF3 plays perfect.
However when i change the sli profile to rendering with one card, the game plays pefect, but only off one card (c1-99%, c2 15-35%)
Is this a driver issue? or, am i doing something wrong? I have no idea what to make of it.
Power issues wouldnt cause this problem would it? I'm running right now on a gold rated Seasonic X-660 psu.... so i should have more than enough headroom.
Completely oddball solution but it worked for me with my 260GTX back then when I had weird rendering issues...
I swapped the cards from one slot to the other, used a different SLI bridge and the problem went away. The cards were probably not seated right.
maybe its a damaged bridge, try to use another,or maybe it's badly pluged
I'll give that a shot.
Would that really affect fullscreen gaming though, like wouldnt that be the case in the desktop too?
I'll try reseating when i get home tonight. hope that actually helps.
maybe there is some dust on the connector,try to blow in the stuff
happened with my nintendo DS lite:whistle::bleh:
there are generally protections on the SLI golden thing ,on the card,if the protection was removed for ages,a simple blow may fix your bug
I have the same problem with a 2 x 560 , I just switch the monitor cable on the other connector of the same card and it's work well now.
With an X660, I'm not convinced that power is not an issue.
AnandTech - The GeForce GTX 660 Ti Review, Feat. EVGA, Zotac, and Gigabyte
Both show ~300w for a single card. I can imagine that running SLI will hit the 600w mark, add the CPU and you will push your Seasonic past its limit.
Are you using Afterburner?
If so, then disable "Synchronize settings for similar graphics processors".
Both those values are total system. with the cards in SLI I'd assume they'd pull about 200-250 each.
CPU and components would pull 100-150, meaning im within the power threashold of the PSU.
I will be upgrading, but im not 100% convinced that power is the problem.
SKY uses the following for reviews:
Processor: Intel i7 3930K @ 4.5GHz
Memory: Corsair Vengeance 32GB @ 1866MHz
Motherboard: ASUS P9X79 WS
Cooling: Corsair H80
SSD: 2x Corsair Performance Pro 256GB
Power Supply: Corsair AX1200
Monitor: Samsung 305T / 3x Acer 235Hz
OS: Windows 7 Ultimate N x64 SP1
The 3930 @4.5, ram and mobo will pull a hell of a lot more from the PSU than my 2500K, 8gb @1.65v and mobo...
so for one card, I'd estimate the draw with one card to be around 260w, add another card, I'd assume 450-500 tops, then add in my pump, and fans... which are pretty much nothing, and boom... within the envelope.
Toms review of two 660tis shows draw as the following:
Did you manage to fix the problem?
|All times are GMT -7. The time now is 07:29 AM.|