Hardware Canucks

Hardware Canucks (http://www.hardwarecanucks.com/forum/)
-   Video Cards (http://www.hardwarecanucks.com/forum/video-cards/)
-   -   Sapphire 5970 (http://www.hardwarecanucks.com/forum/video-cards/40285-sapphire-5970-a.html)

r0k0 January 27, 2011 07:57 PM

Sapphire 5970
 
So i upgraded from my old MB / CPU / Ram and now i cannot run Again Crossfire..

and i've installed the 11.3 and their 2 option tab in GPU-Z you click on 1 core CFX is Disabled and then the Second 5900 tab the CFZX is enabled...

anybody have this problem ?

lowfat January 27, 2011 08:12 PM

You don't have to enable Crossfire w/ the HD5970. It is always enabled.

r0k0 January 27, 2011 08:18 PM

GPUz says its disabled and previous owner said it had to be enabled to have both GPU active while gaming

lowfat January 27, 2011 08:33 PM

Have you tried running a game to see if both cores are being engaged?

r0k0 January 27, 2011 09:03 PM

how do i see if both core are engaged while gaming ?

lowfat January 27, 2011 09:27 PM

Open two instances of GPU-Z. One for each GPU. Then launch a game. Quit the game and look to see if both cores had a load on them.

r0k0 January 27, 2011 09:50 PM

ok.. and now i cannot play dragon age for some physx problem and mafia 2 wont boot...?

ern88 January 27, 2011 10:30 PM

Did you use driver sweep to totally remove the nvidia drivers? You probably have some lingering around. It's a free program.

lowfat January 27, 2011 10:35 PM

They won't launch because you deleted the PhysX software. Download and install this.

NVIDIA DRIVERS 9.10.0513

r0k0 January 28, 2011 02:42 AM

are we not supposed to run nvidia and ati at same time ?


All times are GMT -7. The time now is 06:17 AM.