| ||||
|
Unless you want to spend $20 on some laptop ram, then go right ahead. But it won't help you with your problem! Try this instead: Crucial Rendition 1GB 1X1GB PC2-5300 DDR2-667 240PIN Dimm Memory - DirectCanada edit: NCIX has it for $18.99. NCIX.com - Buy Crucial Rendition 1GB 1X1GB PC2-5300 DDR2-667 240PIN DIMM Memory - RM12864AA667 In Canada.
__________________ Main: GA-X58-Extreme - i7 920 - TX750W - Raptor - 3Gb DDR3-1333 Triple-Channel - GTX260 SLI'ed - TRUE - P182 HTPC: M3A78-EM - 5000+ X2 - HX520W - 'cuda 1Tb - XP2-5300 2x512Mb - 9800GT - SI-128 - Prelude - Moneual 932B |
| |||||||
|
oops believe it or not, i was trying to link to this stuff (which is one line above the stuff i linked).the crucial looks good to me though, thanks now my next question is, if it turns out the board really doesnt like my ocz reapers(i cant use them at all), what should i replace them with? i have seen a lot of people using ocz stuff with this board but mine is a bit older and may be using different chips. i saw a post where a guy was using this mushkin kit and getting nice results...(lets double check that link shall we? ). anyone here have the board, and some first hand experience? i like the look of the firestix used in the hwc review, but they cost more than the board itself...
__________________ rampage formula , e6850 + ocz vendetta 2, mushkin xp 2x2g pc2-8500, xfx 8800gtx, zeus 750w psu, cm ammo 533, hdds, dvd writer, fans, cables etc... |
| ||||
|
If I were you I'd stick (pun intended) with either the Mushkin Redlines (NCIX.com - Buy Mushkin XP PC2-8000 Redline 4GB 2X2GB DDR2-1000 CL5-5-5-12 240PIN Dual Channel Memory Kit - 996593 In Canada.), the XP2s (NCIX.com - Buy Mushkin XP PC2-8500 4GB 2X2GB DDR2-1066 CL5-5-5-15 240PIN Dual Channel Memory Kit - 996599 In Canada.) or the Ascents (NCIX.com - Buy Mushkin Ascent PC2-8500 4GB 2X2GB DDR2-1066 CL5-5-5-15 240PIN Dual Channel Memory Kit - 996619 In Canada.). And the Renditions, just in case. The HPs you linked are great too, but for the same price you can have 2x2Gb / same speed.
__________________ Main: GA-X58-Extreme - i7 920 - TX750W - Raptor - 3Gb DDR3-1333 Triple-Channel - GTX260 SLI'ed - TRUE - P182 HTPC: M3A78-EM - 5000+ X2 - HX520W - 'cuda 1Tb - XP2-5300 2x512Mb - 9800GT - SI-128 - Prelude - Moneual 932B |
| ||||
|
I know you said you tried everything, but can you verify that you tried bumping up the mem voltage a bit?
__________________ Gigabyte P35-DQ6 / E8400 / 2X2 Gig Mushkin PC2 8500 Ascents / Corsair TX750W PSU / Gigabyte 8800GTS / CoolerMaster Cosmos S / MCP655 WC Pump / MCR320 Rad / 6X Yate Loons / PA120.1 / 2X Scythe Ultra Kaze / Swiftech Apogee GTZ WB / Samsung 2253BW ASUS P5Q Pro / Q6600 / 2X1 Gig Supertalent PC2 6400 / PC P&C 750W Silencer / HIS 3870 IceQ3 / HT Omega Striker 7.1 / MCR220-QP-Res / DD DDCPX-Pro / Apogee GT / Swiftech MCW30 / Highspeed PC Tech Station / Samsung 931BF |
| |||||||
| yup. i started at 1.9 and moved my way up to 2.2v with everything on auto. my mem is rated at 2.1 i think. after that i also loosened up the timings, tried to manually set it at its stock settings, slower than stock, and i tried all the auto settings for 667, 800 and 1066. i also tried one stick, and different slots solo and pair because on my 680i it wouldnt boot in the first channel slots, but nothing would work.
__________________ rampage formula , e6850 + ocz vendetta 2, mushkin xp 2x2g pc2-8500, xfx 8800gtx, zeus 750w psu, cm ammo 533, hdds, dvd writer, fans, cables etc... |
| ||||
|
That pretty well covers everything then... might be a secondary memory timing that needs a specific setting, but it's hardly worth fighting from this point to find a sweet spot.
__________________ Gigabyte P35-DQ6 / E8400 / 2X2 Gig Mushkin PC2 8500 Ascents / Corsair TX750W PSU / Gigabyte 8800GTS / CoolerMaster Cosmos S / MCP655 WC Pump / MCR320 Rad / 6X Yate Loons / PA120.1 / 2X Scythe Ultra Kaze / Swiftech Apogee GTZ WB / Samsung 2253BW ASUS P5Q Pro / Q6600 / 2X1 Gig Supertalent PC2 6400 / PC P&C 750W Silencer / HIS 3870 IceQ3 / HT Omega Striker 7.1 / MCR220-QP-Res / DD DDCPX-Pro / Apogee GT / Swiftech MCW30 / Highspeed PC Tech Station / Samsung 931BF |
| ||||
|
..or that your dying 680i damaged the sticks. I know from experience...
__________________ Main: GA-X58-Extreme - i7 920 - TX750W - Raptor - 3Gb DDR3-1333 Triple-Channel - GTX260 SLI'ed - TRUE - P182 HTPC: M3A78-EM - 5000+ X2 - HX520W - 'cuda 1Tb - XP2-5300 2x512Mb - 9800GT - SI-128 - Prelude - Moneual 932B |
| |||||||
|
yeah i was kinda worried about that happening to them, but so far they seem to be working in another system (i think it was a p5k mb). they were working fine in my 680i, but that thing was on its way out.
__________________ rampage formula , e6850 + ocz vendetta 2, mushkin xp 2x2g pc2-8500, xfx 8800gtx, zeus 750w psu, cm ammo 533, hdds, dvd writer, fans, cables etc... |
| |||||||
|
the mushkins just got here in the mail ![]() installed/booted/slightly overclocked already without a hitch thanks for the help everyone. its nice to know someones got your back in times of trouble (pc trouble being the worst kind).
__________________ rampage formula , e6850 + ocz vendetta 2, mushkin xp 2x2g pc2-8500, xfx 8800gtx, zeus 750w psu, cm ammo 533, hdds, dvd writer, fans, cables etc... |
![]() |
| |
| Thread Tools | |
| Display Modes | |