| | disk.mdm | | Unknown S.M.A.R.T. off-line data collection status | Hard Drive Cable Motherboard |
| | disk.mdm | | Device Address or Command Select (DA, CS0-) signals are not working | Hard Drive Cable Motherboard |
| | disk.mdm | | Control Select (CS1-) signal is not working | Hard Drive Cable Motherboard |
| | disk.mdm | | The Interrupt Request (INTRQ-) signal is not working | Hard Drive Cable Motherboard |
| | disk.mdm | | The Data signals (DD) are not working | Hard Drive Cable Motherboard |
| | disk.mdm | | A PIO transfer failed. The IORDY signal may not be working correctly | Hard Drive Cable Motherboard |
| | disk.mdm | | The Passed Diagnostics (PDIAG-) signal was not detected | Hard Drive Cable Motherboard |
| | disk.mdm | | Too much data was transferred | Hard Drive Cable Motherboard |
| | disk.mdm | | The removable media in the drive does not match the requested density | Hard Drive Cable Motherboard |
| | disk.mdm | | The self-test routine was aborted by the host | Hard Drive Cable Motherboard |
| | disk.mdm | | The self-test routine was aborted by the host with a hard or soft reset | Hard Drive Cable Motherboard |
| | disk.mdm | | A fatal or unknown error occurred during the self-test routine | Hard Drive Cable Motherboard |
| | disk.mdm | | The self-test failed for an unknown reason | Hard Drive Cable Motherboard |
| | disk.mdm | | The self-test failed the electrical portion of the test | Hard Drive Cable Motherboard |
| | disk.mdm | | The self-test failed the servo portion of the test | Hard Drive Cable Motherboard |
| | disk.mdm | | The self-test failed the read portion of the test | Hard Drive Cable Motherboard |
| | disk.mdm | | An invalid status value was returned by the self-test | Hard Drive Cable Motherboard |
| | disk.mdm | | ATAPI devices do not support the identify device command | Hard Drive Cable Motherboard |
| | disk.mdm | | Timeout waiting for DRQ to be asserted | Hard Drive Cable Motherboard |
| | disk.mdm | | An 80-pin Ultra DMA 66/100 cable was not detected | Hard Drive Cable Motherboard |
| | disk.mdm | | Device initialization failed | Hard Drive Cable Motherboard |
| | disk.mdm | | Prior DST failure logged in the SMART self-test log | Hard Drive Cable Motherboard |
| | disk.mdm | | IDE CD-RW/DVD+RW format test failed | Hard Drive Cable Motherboard |
| | disk.mdm | | The self-test code took an unexpected path | Hard Drive Cable Motherboard |
| | disk.mdm | | The self-test took too long to run | Hard Drive Cable Motherboard |
| | disk.mdm | | The media is still in the device | Hard Drive Cable Motherboard |
| | diskette.mdm | Diskette Drive Change Line Test | A keystroke ended the change line test. | Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Change Line Test | The change line event did not occur. | Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Seek Test | The change line event did not occur. | Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Seek Test | The specified cylinder range parameters are invalid. | User error Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Seek Test | The disk BIOS operation resulted in an error code of %2.2Xh. | Floppy Drive Motherboard BIOS |
| | diskette.mdm | Diskette Drive Seek Test | The BIOS did not recognize the command code %2.2Xh. | BIOS Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Seek Test | The diskette is write protected. | User error Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Seek Test | The BIOS reported an invalid sector status for the position %s | Floppy Drive Motherboard BIOS |
| | diskette.mdm | Diskette Drive Seek Test | The BIOS reported an error on attempting to reset the device. | Floppy Drive Motherboard BIOS |
| | diskette.mdm | Diskette Drive Seek Test | A data error which could not be corrected was detected at %s | Diskette Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Seek Test | A correctable (soft) data error occurred on the diskette at %s | Diskette Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Seek Test | A diskette controller failure occurred. | Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Seek Test | A seek to position %s failed. | Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Seek Test | An operation on the drive timed out. | Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Read Test | The change line event did not occur. | Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Read Test | The specified cylinder range parameters are invalid. | User error Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Read Test | The disk BIOS operation resulted in an error code of %2.2Xh. | Floppy Drive Motherboard BIOS |
| | diskette.mdm | Diskette Drive Read Test | The BIOS did not recognize the command code %2.2Xh. | BIOS Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Read Test | The diskette is write protected. | User error Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Read Test | The BIOS reported an invalid sector status for the position %s | Floppy Drive Motherboard BIOS |
| | diskette.mdm | Diskette Drive Read Test | The BIOS reported an error on attempting to reset the device. | Floppy Drive Motherboard BIOS |
| | diskette.mdm | Diskette Drive Read Test | A data error which could not be corrected was detected at %s | Diskette Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Read Test | A correctable (soft) data error occurred on the diskette at %s | Diskette Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Read Test | A diskette controller failure occurred. | Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Read Test | A seek to position %s failed. | Floppy Drive Motherboard |
| | diskette.mdm | Diskette Drive Read Test | An operation on the drive timed out. | Floppy Drive Motherboard |