Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Troubleshooting

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old February 17, 2012, 09:18 PM
Top Prospect
 
Join Date: Sep 2011
Location: Dartmouth, Nova Scotia
Posts: 51

My System Specs

Default "No Signal" flashes before Win7 load screen

Heres my system I built last week.
2600k.
Asus P8Z68-vPro Gen3
8gbs Corsair Vengeance low profile ram.
No video card yet.
OCZ Vertex 3 120gb boot drive and a Hitachi 2tb hdd.
Windows 7 Home.

Here's my problem, although I'm not sure its a problem.
I just started to overclock a bit, but I'm not feeling confident about it so I reset everything back to what I think it was before I started.

I notice now that when the computer boots, I get the Windows Loading screen, then the monitor goes blank, says "No Signal", and my keyboard backlighting turns off for a split second. Within a couple seconds I see the login screen. This whole event only takes 2-3 seconds. No hiccups during normal use.

I'm just wondering if its somewhat normal. It may have been doing it all along and I've never noticed.
I'm going to reset my CMOS because I want it all at default settings for now until I research overclocking more.

Thanks.
Reply With Quote
  #2 (permalink)  
Old February 18, 2012, 07:52 AM
Reyzac's Avatar
MVP
 
Join Date: Aug 2010
Location: Nova Scotia
Posts: 271

My System Specs

Default

Happens to me too. I wouldn't worry too much about it.
__________________
Who needs a real doctor when you got my machines and their scary needles?
I also go by Silver Blues in lots of other places.
Reply With Quote
  #3 (permalink)  
Old February 18, 2012, 11:23 AM
KaptCrunch's Avatar
Hall Of Fame
 
Join Date: Feb 2008
Location: Ontario
Posts: 2,970
Default

possible in cmos settings for video

has video boot order looking in slot video for first boot , moniter then No Signal

don't see it then moves to onboard video, then you got screen
Attached Images
 
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Keyboard types "w " when i press "w" matthew2180 Troubleshooting 14 December 20, 2011 10:21 AM
How do i know if my "Drive Controller" is running in "AHCI mode"? Teo3201 Storage 2 October 8, 2011 10:54 PM
"Wii 2" Codenamed: "Project Cafe" BFighter Gaming 5 April 24, 2011 11:16 AM
Cold boot leads to either blue screen or "detecting drives..." tragd Troubleshooting 2 June 22, 2010 03:35 PM
Make "All Programs" in start menu always open? (Win7) 300 O/S's, Drivers & General Software 3 November 7, 2009 10:41 AM