Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Troubleshooting
Reload this Page PC Won't Boot
Mark Forums Read
Media Gallery Register Members List LAN Calendar Search Today's Posts

       
Reply
Page 2 of 2 < 1 2
 
LinkBack Thread Tools Display Modes
  #11 (permalink)  
Old August 15, 2011, 09:58 PM
KaptCrunch's Avatar
Hall Of Fame
  
Join Date: Feb 2008
Location: Ontario
Posts: 2,236
Default
Quote:
Originally Posted by Kommie986 View Post
Sadly I don't have another one and I don't want to go out and buy a new one just to find out it's not the PSU's problem...
If I use the paperclip trick, a molex fan still spins so IDK if it is the PSU.
thats the 12v rail working, what about 3.3v rail

or try PSU else where
Reply With Quote
  #12 (permalink)  
Old September 3, 2011, 10:53 AM
Rookie
  
Join Date: Feb 2010
Posts: 32
Default
Check the voltages with a psu tester or multimeter... If you are getting no beeps on the motherboard it could be damage to the board or shorting behind the board as well
Reply With Quote
Reply
Page 2 of 2 < 1 2


« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
100% Fan and no boot Ging9 Troubleshooting 12 February 9, 2011 11:55 AM
Can't boot up! Scripter Troubleshooting 22 May 18, 2010 08:12 AM
Reboot and select proper boot device or insert boot media in selected boot device BrianHanna Troubleshooting 44 February 11, 2010 01:13 PM
My Boot settings (Bootsect.bak/Boot directory) installed to another HDD? chouchou Troubleshooting 7 December 21, 2008 07:46 PM