Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Troubleshooting

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old June 8, 2011, 10:00 PM
Top Prospect
 
Join Date: Mar 2010
Posts: 75
Default noob needs help: x58 classified mb no pwr or vid out

haf x
i7 920
evga x58 classified 3sli
gtx580
12 gb dominator
corsair ps 1200w
6hdds connected

k so this is my first build and im not getting pwr led on my motherboard. all fans work, hard drives spin, gpu is on, all leds are on exept the pwr and diag lights and has no video out, tryd re-seating gpu and ram, tryd single stick of ram, double checked all connectors looked on the internets for abit. im out of ideas. possible hard drive issue? im using a hd with some files already on it does that matter and does your main hd have to be connected to sata 0 or 1? should i just start checking the psu connectors for poper outputs? any thoughts?

thx
Reply With Quote
  #2 (permalink)  
Old June 8, 2011, 10:12 PM
Your_friendly_gamer's Avatar
Allstar
F@H
 
Join Date: Nov 2010
Location: Ottawa
Posts: 674

My System Specs

Default

Hey man,

That really sucks huh, I am not any good but I recently also purchased a used msi bigbang x58 and I was having the same issue but i did get into bios but I changed the memory profile to xmp. What I had to do was clear cmos and then I was good to go. Did you get video at all? Just unplug all your hard drives and try booting up with 1 attached only. ANd clead cmos and then try see if that works. That is so weird and I would hate to have that happened to me! good luck man!
Reply With Quote
  #3 (permalink)  
Old June 8, 2011, 11:02 PM
Banned
F@H
 
Join Date: Aug 2007
Location: mtl
Posts: 12,694
Default

try it on your table..do you have any el cheapo ram?

got another psu kicking aROUND? how about another video card?

the last thing you'll do is reseat cpu. why? the least you touch that,the least you'll have a chance
to mess the pins up :)
Reply With Quote
  #4 (permalink)  
Old June 8, 2011, 11:04 PM
Top Prospect
 
Join Date: Mar 2010
Posts: 75
Default

ya i tried clearing the cmos and nothing theres no video feed at all i will try the one hard drive thing tho ill let ya know
Reply With Quote
  #5 (permalink)  
Old June 10, 2011, 04:18 AM
KaptCrunch's Avatar
Hall Of Fame
 
Join Date: Feb 2008
Location: Ontario
Posts: 2,937
Default

sounds if PSU failed you try another
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Noob here. Please help me.. vinzend Water Cooling 36 October 19, 2009 03:23 PM
noob help for i7-860 OC Sandro_Bit Overclocking, Tweaking and Benchmarking 2 September 24, 2009 01:40 PM
help a noob out jtf2 Audio 40 August 27, 2009 09:54 PM
[WTB] I am a noob and i need some help :D eltiti55555 Buy/Sell & Trade 16 March 9, 2009 01:02 PM
Noob here, trying to get my first WC setup together. jaszypoo Water Cooling 13 December 11, 2008 06:25 PM