Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Troubleshooting

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old December 4, 2010, 03:17 PM
Hexofire's Avatar
Rookie
 
Join Date: Aug 2010
Location: Qc
Posts: 16

My System Specs

Default 800d hotswap bays not working

I just build up my rig in a 800D(impressive ...and enormous) as far as i know everything went well
until the first boot up showed up :Improper Boot Device.
Thought i did something wrong or the Hdd died but after removing it from the bay and connecting it
directly (Standard setup) everything was working!
I installed it back into the hot swap bay but this time i used the sata power cable directly from the power supply rather then using the cable corsair give, and it worked fine.
I checked the cable with a multimeter on conductivity test on every wire and everything is ok.
Anyone got a issue like that?
__________________
Sorry for my bad english
Reply With Quote
  #2 (permalink)  
Old December 4, 2010, 08:31 PM
Perineum's Avatar
Hall Of Fame
F@H
 
Join Date: Mar 2009
Location: Surrey, B.C.
Posts: 4,037

My System Specs

Default

Nope, mine works perfect....
Reply With Quote
  #3 (permalink)  
Old December 4, 2010, 08:45 PM
belgolas's Avatar
Hall Of Fame
F@H
 
Join Date: May 2007
Location: St. Thomas Ontario close to london
Posts: 3,922

My System Specs

Default

I had an issue as well. All I had to do was make sure the HDD was actually all the way in. The hot swap bay is all I use.
__________________

Sponsor a child!
Fight poverty.

Qoute by Perineum
"ID10T. I just BETCHA he's got 9 toolbars on his web browser right now."
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
HAF X hot swap bays francisw19 Cases 6 May 3, 2011 05:08 PM
Suggestions for front loading hotswap bays Sanhime Storage 0 February 19, 2010 12:40 PM
3 extra 3.5" drive bays sindraod New Builds 4 November 18, 2009 12:28 PM
NZXT LEXA: HDD Bays ? JORD4N Cases 0 October 3, 2009 06:38 PM
eSata Hotswap? enspirent Troubleshooting 3 March 24, 2009 06:06 PM