Hardware Canucks

Hardware Canucks (http://www.hardwarecanucks.com/forum/)
-   Troubleshooting (http://www.hardwarecanucks.com/forum/troubleshooting/)
-   -   Can't boot up! (http://www.hardwarecanucks.com/forum/troubleshooting/32124-cant-boot-up.html)

Scripter May 15, 2010 02:32 PM

Can't boot up!
 
Hey guys, well I decided before I would transfer my rig into my new case I would try it out with a very old system (Pentium 4). I took all the parts out, wrote down on a piece of paper which wire goes where and etc. I go and plug it and press the power button but nothing happens while I press the power. It simply does not turn on, nothing. Now, I'm not sure but did I fry the mobo or are the wires I'm making it boot not correctly in? If it's just the wires how is it suppose to look like.

Thanks for your time :P

Edit: everything was working just fine before I disassembled and assembled everything back together.

ZZLEE May 15, 2010 02:39 PM

check
 
Make sure everthing is pluged in propperly. make sure that nothing is grounding out that shoulent. Did the power supply come on ?

Scripter May 15, 2010 02:41 PM

Quote:

Originally Posted by ZZLEE (Post 378482)
Make sure everthing is pluged in propperly. make sure that nothing is grounding out that shoulent. Did the power supply come on ?

Nope, the power supply didn't come on.

KaptCrunch May 15, 2010 03:10 PM

pictures are more then a thosands words.............lol

would help knowing the hardware (MB) your trying to boot, let me polish my crystal ball and i'll get back to you

Scripter May 15, 2010 03:28 PM

Quote:

Originally Posted by KaptCrunch (Post 378494)
pictures are more then a thosands words.............lol

would help knowing the hardware (MB) your trying to boot, let me polish my crystal ball and i'll get back to you

Only asus motherboard that looks very similar to the one I have is:
http://www.xbitlabs.com/images/mainb...cusl2/cusl.jpg
http://img13.imageshack.us/i/76772830.png/http://img13.imageshack.us/i/76772830.png/
http://img13.imageshack.us/i/76772830.png/

_dangtx_ May 15, 2010 03:38 PM

cusl2-c or something?

Scripter May 15, 2010 03:46 PM

Quote:

Originally Posted by _dangtx_ (Post 378502)
cusl2-c or something?

found it, its acutally just an Asus CUSL2

_dangtx_ May 15, 2010 04:11 PM

good. look in the back, any issues? had a few flex and go.
check the hs. less contact=bad bad bad

Scripter May 15, 2010 04:28 PM

Quote:

Originally Posted by _dangtx_ (Post 378523)
good. look in the back, any issues? had a few flex and go.
check the hs. less contact=bad bad bad

Just did what you asked, I looked at the back and everything seems fine.

_dangtx_ May 15, 2010 04:37 PM

and everything is assembled on your table, free of anythign that might short out, ram,cpu etc reseated?


All times are GMT -7. The time now is 01:49 PM.