Hardware Canucks

Hardware Canucks (http://www.hardwarecanucks.com/forum/)
-   Troubleshooting (http://www.hardwarecanucks.com/forum/troubleshooting/)
-   -   HELP Comp Won't Post (http://www.hardwarecanucks.com/forum/troubleshooting/27827-help-comp-wont-post.html)

v0maru January 15, 2010 04:30 PM

HELP Comp Won't Post
 
Just added in new sets of Ram (G SKILL 2X2 4GB DDR 1066) , NEW PSU OCZ Z Series 550W, and a new Video card XFX 5770 1GB

Current computer spec prior to the upgrade was

PSU: CORSAIR VX 450W
MOBO: GIGABYTE P35 DS3L
CPU: INTEL C2D E5300
RAM: 2X1 2GB MUSHKIN performance series 1.8V
VCard: XFX7600GS 256MB

Right now the mobo won't put up
fan will only spin up for less then a second than nothing happens...
i've already tried resseting the cmos , pulling the battery...

I also tried to stick 1 GB of the old ram in still won't boot,
i tried booting it without the drives plugged in and still won't boot
can anyone find an answer

Thankyou,

Mark

lechumbl January 15, 2010 04:35 PM

Hi,

What is the beep code you are receiving?


Take care...........

Perineum January 15, 2010 04:49 PM

Put the old video card back in first of all.... if that doesn't fix it then put the old ram back in. Last of all, try the PSU.

You're going to have to uninstall them all one at a time until you find the troubled component. I suspect video card first.....

martin_metal_88 January 15, 2010 07:09 PM

that's wierd, previous post are pretty good resume of what you should do. Give us some news when you have;)

v0maru January 16, 2010 12:34 AM

THere's no beep code... tried old ram, tried 1 ram, will update more tomorrow

v0maru January 16, 2010 01:41 PM

A little update.. um the computer posted for about 10 minutes, when i tried to install the ATI drivers for the XFX5770, half way thtrough and the computer turned off it self.. right now i put my old PSU back and it seems to be working fine for 15 mins now.. it looks as if the new pSu is faulty??

3.0charlie January 16, 2010 01:57 PM

Probably. Time to swap.

Did you un-install the nvidia drivers before installing the ATI - especially using Drivercleaner in safe mode?

Moba January 16, 2010 03:41 PM

Check the current out of the PSU if you can with a meter. There's some guides online to help you if you've never done it...

Otherwise RMA.

Perineum January 16, 2010 04:28 PM

Most people don't have a DVOM, let alone a Ammeter.... Swapping the PSU with a known good working one will be easier.

v0maru January 16, 2010 04:44 PM

im gona try to run the psu on another mobo,, so far it boots up i'll see if it can last over an hour


All times are GMT -7. The time now is 06:26 AM.