Hardware Canucks

Hardware Canucks (http://www.hardwarecanucks.com/forum/)
-   Troubleshooting (http://www.hardwarecanucks.com/forum/troubleshooting/)
-   -   3pin to 2 pin power led? (http://www.hardwarecanucks.com/forum/troubleshooting/27813-3pin-2-pin-power-led.html)

BobbyLou January 15, 2010 10:50 AM

3pin to 2 pin power led?
my case (lian li p50) has a 3 pin power led, where as the motherboard only has a 2pin, any way to hook er up?

MarkOne January 15, 2010 11:07 AM

very simple, you use a small tool to unlock one of the wire from the connector and you place it in the middle of the connector , just live the hole on the connector pending outside , just make sure to have the god polarity, color wire is positive and black one negative

BobbyLou January 15, 2010 11:38 AM

wut..? sorry im dum when it comes to electrical work. any guide or colorful pics?

MarkOne January 15, 2010 11:43 AM

ok the other way

cut the connector in half , in the middle, you will have 1 connector for each wire left , just plug them one by one in the motherboard socket. you just turn them 90 degree so the remain of the cutting is not touching

BobbyLou January 15, 2010 01:29 PM

actually I just understood your first message. There is only two wires coming out of the 3 pin plug, one of the 3 plugs on the conenctor is a dummy one. I will try to pop it out and put it in the other one.

All times are GMT -7. The time now is 03:19 AM.