Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Troubleshooting

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old December 2, 2009, 11:07 PM
Rookie
 
Join Date: Sep 2009
Posts: 4
Default OVERCLOCKING issues. =/

Alright, getting right to it:


Core i7 920
Asus P6T Deluxe V2
Patriot Viper Series? 1600Mhz cas 8
GTX275
Corsair TX750W
2X WD 640GB RAID0
Windows 7 Home Pre 64 bit


Right now it is running at stock
but i have had it up at 3.61Ghz easily. and i prolly consider myself a noob at oc-ing
then my computer had some problems, so i reformatted my computer, updated bios as well

and now. i cant get it back up to 3.6
i cant clock it to ANYTHING other than stock D:
which is really upsetting because i have an i7 at stock, when i bought it to be clocked ><


i have a feeling it is because i updated the BIOS?
any other ideas?

my board came with the bios version of......0504
then after the reformat it became 0610

thinking it was the bios problem, i updated it again.... to the current version of 0704.


Cooling is not a problem, as when i had it up at 3.6 before i was in aruond mid low 70s at load after a couple hours.
Cooler Master V8 is doing the cooling.


yea...
thanks =)
Reply With Quote
  #2 (permalink)  
Old December 3, 2009, 08:42 AM
MVP
 
Join Date: Dec 2008
Location: Toronto
Posts: 440

My System Specs

Default

Post your set up so we have some details, like this:

Quote:
Here is my setup:
20x19=3.8GHz stable for 9 hours of P95 blend test.
Idle temp 44c. Full load with P95 74c max.
Ram at rated speed 1600@8,8,8,24 1T

Stepping: D0
MB Intelligent Tweaker (M.I.T):
CPU Clock Ratio [19x]
CPU Frequency [3.8GHz] [200x19]
QPI Link Speed [x36] [7.2GHz]
Base Clock Control [Enabled]
BCLK Frequency (Mhz) [200]
Performance Enhance [Standard]
System Memory Multiplier (SPD) [8.0]

Advanced Clock Control:
Base Clock (BCLK) Control [Enabled]
BCLK Frequency (Mhz) [200]
PCI Express Frequency (Mhz) [101]
Uncore & QPI Features:
QPI Link Speed [x36]
QPI Link Speed [7.2GHz]
Uncore Frequency [x17] (3400 MHz)

Advanced CPU Features:
Intel Turbo Boost Tech. [Disabled]
CPU Cores Enabled [All]
CPU Multi Threading [Enabled]
CPU Enhanced Halt (C1E) [Disabled]
C3/C6/C7 State Support [Diabled]
CPU Thermal Monitor [Enabled]
CPU Eist Function [Enabled]
Virtualization Technology [Enabled]
Bi-directional PROCHOT [Enabled]

CPU Vcore 1.22500V
QPI/Vtt 1.30000V
IOH Core auto
DRAM Voltage 1.64V

Advanced Voltage Control:
Load-Line Calibration [Enabled]
CPU Vcore 1.225V
QPI/Vtt Voltage 1.300V
CPU PLL 1.800V
>>>MCH/ICH
PCIE 1.500V [Auto]
QPI PLL auto
IOH Core auto
ICH I/O Auto
ICH Core Auto
>>>DRAM
DRAM Voltage 1.64v
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bootup Issues?!?!? HELP!!! CasheKicker Troubleshooting 16 April 5, 2009 09:36 PM
Motherboard Issues ImmaPC CPU's and Motherboards 13 December 14, 2008 12:45 AM
e8400 issues enaberif CPU's and Motherboards 5 February 15, 2008 02:13 PM
reboot issues Jhayman Troubleshooting 7 January 23, 2008 06:00 AM
Issues with TF2. NuxTux Gaming 0 January 11, 2008 01:27 PM