Hardware Canucks

Hardware Canucks (http://www.hardwarecanucks.com/forum/)
-   Troubleshooting (http://www.hardwarecanucks.com/forum/troubleshooting/)
-   -   Disk Boot Failure - Insert system disk and press enter? (http://www.hardwarecanucks.com/forum/troubleshooting/17850-disk-boot-failure-insert-system-disk-press-enter.html)

lanken123 May 12, 2009 04:37 PM

Disk Boot Failure - Insert system disk and press enter?
 
so I helped my friend build his PC. I turn it on, it loads up goes to the mobo menu, then displays "diskboot failure insert system disk". I do that, and it repeats. I'm sure all the cables are connected, I've gone through the bios and enabled first boot priority to CDROM. second to Hard disk. third to CD ROM again. and still nothing seems to work/

kirk_d May 12, 2009 04:50 PM

Need more info please.
What's the build, OS, etc.:biggrin:

Object X May 12, 2009 05:58 PM

What did you set the sata mode to? If its set to AHCI or RAID mode you have to tell the bios to boot from either scsi(AHCI) or from raid. Even if you dont have a raid array running you will still get that error. Also it may be that the OS disk is garbage and wont boot from CD and attempting to boot from the primary HDD. Im leaning more towards a bad OS disk.

auratus May 12, 2009 06:03 PM

A cdrom ! are you installing XP or Vista. ?

lanken123 May 13, 2009 12:51 AM

omg, so sorry guys. I fixed it right after I posted this thread.

Soultribunal May 13, 2009 07:23 AM

No worries, good to hear you got it up and running.
What did it end up being?


ST


All times are GMT -7. The time now is 05:15 AM.