Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Troubleshooting

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old June 8, 2007, 11:42 AM
sswilson's Avatar
Moderator
F@H
 
Join Date: Dec 2006
Location: Moncton NB
Posts: 15,291

My System Specs

Default program for reading bios info on intel?

For S939 there were several programs which would read the enhanced memory settings off of the bios. Is there such a thing for intel chipsets, or was the on-board memory controller of the A64s just easier to access?
__________________
Gigabyte Z97N-WIFI / i7 4770K / 2X 8G Gskill 1866 Sniper / XFX XTR 750 / EVGA GTX 970 SSC ACX 2.0+
Corsair 380T / Corsair H100i GTX AIO/ Intel 730 Series 480GB SSD / Seagate Barracuda 1TB / Dell UltraSharp U2412M

Asrock AM1H-ITX / AM1 Athlon 5350 / 2X4G Gskill PC3-14900 / Intel 6235 Wi-Fi / 90W Targus Power Brick / 250G Samsung 840 Series SSD / Mini-Box M350 / 24" Westinghouse L2410NM
Reply With Quote
  #2 (permalink)  
Old June 8, 2007, 12:58 PM
Eldonko's Avatar
Hardware Canucks Reviewer
 
Join Date: Apr 2007
Location: Calgary, AB
Posts: 5,447
Default

You mean like memset or systool?
Reply With Quote
  #3 (permalink)  
Old June 8, 2007, 01:43 PM
sswilson's Avatar
Moderator
F@H
 
Join Date: Dec 2006
Location: Moncton NB
Posts: 15,291

My System Specs

Default

Those look like exactly what I'm looking for. Thanks!!!!!

I don't want them to set timings from in windows (I'm always afraid of finding a setting that isn't affected by a c-mos reset.... :) ), I just want to know what the current settings are @ auto so that I know where to start from bios.

Do you have a preference between the two? (memset looks like it works with the p965 chipset).
__________________
Gigabyte Z97N-WIFI / i7 4770K / 2X 8G Gskill 1866 Sniper / XFX XTR 750 / EVGA GTX 970 SSC ACX 2.0+
Corsair 380T / Corsair H100i GTX AIO/ Intel 730 Series 480GB SSD / Seagate Barracuda 1TB / Dell UltraSharp U2412M

Asrock AM1H-ITX / AM1 Athlon 5350 / 2X4G Gskill PC3-14900 / Intel 6235 Wi-Fi / 90W Targus Power Brick / 250G Samsung 840 Series SSD / Mini-Box M350 / 24" Westinghouse L2410NM
Reply With Quote
  #4 (permalink)  
Old June 8, 2007, 02:51 PM
Eldonko's Avatar
Hardware Canucks Reviewer
 
Join Date: Apr 2007
Location: Calgary, AB
Posts: 5,447
Default

Memset is easier to work with, systool can cause some instability if you try and tweek the wrong setting.
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
New temperature reading program Wankerfx Overclocking, Tweaking and Benchmarking 5 March 3, 2008 08:29 PM
need info djnocide Audio 31 February 29, 2008 06:24 PM
program Rapid-X O/S's, Drivers & General Software 8 September 3, 2007 06:13 PM
CS:S ti normal program Long John Silver Gaming 5 June 21, 2007 07:32 PM
Virtual Bios / Bios Copies Sting3r11 Off Topic 1 March 17, 2007 07:33 AM