Go Back   Hardware Canucks > PC BUILDERS & TWEAKERS CORNER > Troubleshooting

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old January 22, 2009, 08:15 PM
belgolas's Avatar
Hall Of Fame
F@H
 
Join Date: May 2007
Location: St. Thomas Ontario close to london
Posts: 3,901

My System Specs

Default Brother's comp

Well my brother's comp was working before and all he did was get a new case. He gets no post, no beeps and no display. All fans have power and the mother board lights all come on. It is the same mobo as in my second rig. I have told him to reset the CMOS and that doesn't help. Also I had him only try 1 stick of ram at a time in different slots and still nothing. All cables are plugged in.

I bet it is something obvious.

:help:
__________________

Sponsor a child!
Fight poverty.

Qoute by Perineum
"ID10T. I just BETCHA he's got 9 toolbars on his web browser right now."
Reply With Quote
  #2 (permalink)  
Old January 22, 2009, 08:18 PM
enaberif's Avatar
Hall Of Fame
 
Join Date: Dec 2006
Location: Calgahree, AB
Posts: 10,473
Default

Pull the board out and check for misplaced standoffs.
Reply With Quote
  #3 (permalink)  
Old January 22, 2009, 08:22 PM
Jake_HT's Avatar
Hall Of Fame
F@H
 
Join Date: May 2008
Location: Calgary, AB
Posts: 1,983

My System Specs

Default

What he said, make sure all standoffs are in place, and the ones that aren't being used aren't there. Then try it!
__________________
http://jakeht.deviantart.com/
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Comp won't Boot up v0maru Troubleshooting 2 December 23, 2008 10:23 PM
New Comp, no boot Jonesy Troubleshooting 2 June 24, 2008 05:42 PM
new comp djnocide CPU's and Motherboards 1 March 21, 2008 07:34 PM
My Comp... acolite Case Mods, Worklog & Gallery 3 November 10, 2007 08:31 PM
Widescreen or not?for od comp NoobLordSpud Display Units 6 July 8, 2007 10:05 AM