Antec Skeleton, Power issue.

[sprucebr1]

Hi, I'm currently having a problem with the power on the skeleton. It is shorting out when I hit the power button. It turns on very briefly, and then shuts down. I've tried different power cables, set it so that pw_switch was the only thing hooked up on the f_panel. Checked to make sure nothing is touching the underside of the mobo, it looks good. I've checked all PSU connections ATX 24pin and 4pin. I have no clue, this was all working fine before, all I did was move the hardware. all the fans seem to work, they all spin when the power button is pushed, but again, it just quits on me. Any help on this would be very much appreciated. Thanks. I'm begining to think its the case, and not my hardware, lol.
My PSU is an OCZ StealthXstream 600watt 24pin+4pin.

[Varroa]

I had the problem once and the only cure was to completely remove everything and re-install everything. The short can be caused by something so small you can't see it. Have fun and hope this solves your problem.