Go Back   Hardware Canucks > HARDWARE > Storage

LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old January 29, 2008, 11:59 AM
Join Date: Jan 2008
Location: Waterloo
Posts: 2
Default hp ml150 drive mounting

I picked up an hp ml150 g3 5120 smartbuy server which included an sas hot plug drive bay, but no drives. I have a failing server from which i would like to transfer the raid card and ide drives. However, I'm having trouble finding a part number for drive rails. I've already removed the backpane, so cabling won't be an issue. any suggestions?
Reply With Quote
  #2 (permalink)  
Old January 29, 2008, 12:41 PM
Cptn Vortex's Avatar
Hall Of Fame
Join Date: May 2007
Location: Vancouver
Posts: 3,999

Ouch, that is a pain. The drive rails are NOT an aftermarket part. Essentially, you are going to be stuck with buying HP harddrives, which I may add are exptremely overpriced. I've run into this problem before, and HP was less than helpful, let me tell you.
The Vortex H20

Coolermaster ATCS 840 w Window panel
MSI Z87-G45 Gaming
i5 4690K @ 4.5GHZ
SLI GTX 1070
12GB GSkill Ripjaws X 2133MHZ CL10
OCZ Z-Series GOLD 850W
2 x 240GB Patriot Blaze SSD RAID0 :)
HP OMEN 32 1440p 75hz

Benq W1070 Pojector.

EK Supreme HF, MCR320+Gelid Silent 12 Push/Pull, DD Pump, EK Multioption 100ml Res, EK Coolstream XT 220 RAD Gelid Wings Push/Pull.
Reply With Quote

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Verical vs Horizontal Hard Drive Mounting Johnboy Storage 4 October 12, 2007 12:28 PM
hard drive set up Corpus Masochist Storage 2 September 1, 2007 11:58 AM
ftp to Hard drive opj38 O/S's, Drivers & General Software 1 July 10, 2007 10:39 AM
New over-and-under dvd drive from Plextor Babrbarossa Press Releases & Tech News 1 March 21, 2007 08:57 AM