Go Back   Hardware Canucks > HARDWARE > Storage

    
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old July 27, 2010, 06:57 PM
gingerbee's Avatar
Hall Of Fame
F@H
 
Join Date: Jan 2009
Location: Orillia, Ontario
Posts: 6,824

My System Specs

Default IndilinX ssd status tool.

Well for those still rocking indilinx ssd i just found a status tools kinda of handy so i thought i would share.

The Indilinx SSD Status Thread - Overclock.net - Overclocking.net
__________________
Fav quote "One should strive to achieve; not sit in bitter regret." Ronin Harris
Reply With Quote
  #2 (permalink)  
Old July 27, 2010, 08:22 PM
chrisk's Avatar
Folding Captain
 
Join Date: Jul 2008
Location: GTA, Ontario
Posts: 7,396

My System Specs

Default

I've had mine in my laptop since the winter, and the health is at 86%.
__________________
Fold for team #54196
Reply With Quote
  #3 (permalink)  
Old July 27, 2010, 10:03 PM
gingerbee's Avatar
Hall Of Fame
F@H
 
Join Date: Jan 2009
Location: Orillia, Ontario
Posts: 6,824

My System Specs

Default

hell both my a-data's have been thrashed both are below 50% and has like 1200 gb written to it still going strong too i am going to rock all the ssd i have till there death just to see. funny thing is when you flash it it goes back to 100% but the "Cell Wearing" is what really matters i think too bad i am not sure what it means eh ha ha.

here's 1 of my falcon 1 after heavy abuse
Attached Images
 
__________________
Fav quote "One should strive to achieve; not sit in bitter regret." Ronin Harris
Reply With Quote
  #4 (permalink)  
Old August 14, 2010, 12:03 AM
THS THS is offline
Top Prospect
 
Join Date: Jul 2010
Location: Toronto, Canada
Posts: 73

My System Specs

Default

Thanks, didn't know of that tool !
Reply With Quote
  #5 (permalink)  
Old August 14, 2010, 12:22 AM
Hall Of Fame
 
Join Date: Apr 2008
Location: Saskatchewan
Posts: 1,122

My System Specs

Default

hmm i must have a setting borked? this ssd was just opened approx 60days ago.. pc runs 24/7

Edit maybe 3 month MAX been using it.. 2040hrs
Attached Images
 
__________________
http://valid.canardpc.com/show_oc.php?id=932179

"Be so good at what you do that you cant be ignored"


Last edited by jay51; August 14, 2010 at 12:30 AM.
Reply With Quote
  #6 (permalink)  
Old August 14, 2010, 12:45 AM
gingerbee's Avatar
Hall Of Fame
F@H
 
Join Date: Jan 2009
Location: Orillia, Ontario
Posts: 6,824

My System Specs

Default

that's a pretty high cell wearing. but after looking into this what i think really matters is the max pe count on crystal disk info 2710= hex 10000 so from my crude understanding it should mean not one cell is dead yet?? right ( really just an guess from what the ocz forums says about indilinx ssd ) what are others thoughts on this???

edit ^^^ amd chipset not running trim maybe hope not once again just a guess
__________________
Fav quote "One should strive to achieve; not sit in bitter regret." Ronin Harris
Reply With Quote
  #7 (permalink)  
Old August 14, 2010, 12:56 AM
Hall Of Fame
 
Join Date: Apr 2008
Location: Saskatchewan
Posts: 1,122

My System Specs

Default

Code:
----------------------------------------------------------------------------
CrystalDiskInfo 3.7.0 (C) 2008-2010 hiyohiyo
                                Crystal Dew World : Crystal Dew World
----------------------------------------------------------------------------

    OS : Windows 7 Ultimate Edition [6.1 Build 7600] (x64)
  Date : 2010/08/14 1:54:49

-- Controller Map ----------------------------------------------------------
 + Standard Dual Channel PCI IDE Controller [ATA]
   - ATA Channel 0 (0)
   - ATA Channel 1 (1)
 + Standard Dual Channel PCI IDE Controller [ATA]
   + ATA Channel 0 (0)
     - OCZ-VERTEX ATA Device
   - ATA Channel 1 (1)

-- Disk List ---------------------------------------------------------------
 (1) OCZ-VERTEX : 64.0 GB [0-0-0, pd1] - ix

----------------------------------------------------------------------------
 (1) OCZ-VERTEX
----------------------------------------------------------------------------
           Model : OCZ-VERTEX
        Firmware : 1.5
   Serial Number : BK2AF553DYxxxxxxxxxxx
       Disk Size : 64.0 GB (8.4/64.0/64.0)
     Buffer Size : >= 32767 KB
     Queue Depth : 32
    # of Sectors : 125045424
   Rotation Rate : ---- (SSD)
       Interface : Serial ATA
   Major Version : ATA8-ACS
   Minor Version : ----
   Transfer Mode : SATA/300
  Power On Hours : 2041 hours
  Power On Count : 102 count
     Temparature : Unknown
   Health Status : Good (87 %)
        Features : S.M.A.R.T., 48bit LBA, NCQ, TRIM
       APM Level : ----
       AAM Level : ----

-- S.M.A.R.T. --------------------------------------------------------------
ID Raw Values (8)   Attribute Name
01 0000000000000006 Read Error Rate
09 00000000000007F9 Power-On Hours
0C 0000000000000066 Power Cycle Count
B8 0000000000000086 Initial Bad Block Count
C3 0000000000000000 Program Failure Block Count
C4 0000000000000000 Erase Failure Block Count
C5 0000000000000000 Read Failure Block Count
C6 0000000069F50732 Total Count of Read Sectors
C7 000000005BF14B39 Total Count of Write Sectors
C8 0000000001BC5EC0 Total Count of Read Commands
C9 0000000001852D38 Total Count of Write Commands
CA 000000000044BA9E Total Count of Error bits from flash
CB 00000000003F850A Total Count of Read Sectors with Correctable Bit Errors
CC 0000000000000000 Bad Block Full Flag
CD 0000000000002710 Maximum PE Count Specification
CE 000000000000001B Minimum Erase Count
CF 0000000000000C66 Maximum Erase Count
D0 000000000000052E Average Erase Count
D1 0000000000000057 Remaining Drive Life
D3 0000000000000000 Unknown
D4 0000000000000000 Unknown
D5 0000000000000000 Unknown
PE=2710
__________________
http://valid.canardpc.com/show_oc.php?id=932179

"Be so good at what you do that you cant be ignored"


Last edited by jay51; August 14, 2010 at 01:03 AM.
Reply With Quote
  #8 (permalink)  
Old August 14, 2010, 01:01 AM
Hall Of Fame
 
Join Date: Apr 2008
Location: Saskatchewan
Posts: 1,122

My System Specs

Default

Quote:
Originally Posted by gingerbee View Post
that's a pretty high cell wearing. but after looking into this what i think really matters is the max pe count on crystal disk info 2710= hex 10000 so from my crude understanding it should mean not one cell is dead yet?? right ( really just an guess from what the ocz forums says about indilinx ssd ) what are others thoughts on this???

edit ^^^ amd chipset not running trim maybe hope not once again just a guess
trim is on ,im sure of it.. i hope..
__________________
http://valid.canardpc.com/show_oc.php?id=932179

"Be so good at what you do that you cant be ignored"

Reply With Quote
  #9 (permalink)  
Old August 14, 2010, 01:05 AM
gingerbee's Avatar
Hall Of Fame
F@H
 
Join Date: Jan 2009
Location: Orillia, Ontario
Posts: 6,824

My System Specs

Default

ya i see your up late... oh right wrong side of the country yes i got the same thing so i am not really worried about it too much like i said my a-data s592 says 32% left and still going like a beast not one bit of a slow down and everyone over at ocz ( where there's the most info on indilinx/barefoot ssd ) seems to only worried about max pe count because it shows flash/cells that are dead period from what my little brain can handle. ahhh i got horse's on the brain
__________________
Fav quote "One should strive to achieve; not sit in bitter regret." Ronin Harris
Reply With Quote
  #10 (permalink)  
Old August 14, 2010, 01:11 AM
gingerbee's Avatar
Hall Of Fame
F@H
 
Join Date: Jan 2009
Location: Orillia, Ontario
Posts: 6,824

My System Specs

Default

how just because you can confirm that 7 is running it does not mean the drivers are passing the command on to the ssd. not sure how to confirm that we can all
this just confirms that 7 is running the trim driver does not mean that amd southbridge are passing to the ssd.. correct me if i am wrong please
Attached Images
 
__________________
Fav quote "One should strive to achieve; not sit in bitter regret." Ronin Harris
Reply With Quote
Reply


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
ssd all-in-one tool gingerbee O/S's, Drivers & General Software 0 February 11, 2010 04:40 PM
G.SKILL Falcon 64GB Indilinx 2.5IN ? dadzilla Storage 5 December 29, 2009 07:17 PM
Status bwm HardwareCanucks F@H Team 5 December 2, 2009 06:00 PM
[WTB] 60Gb+ SSD indilinx or intel Akai Buy/Sell & Trade 0 November 27, 2009 03:07 PM