Data corruption when upgrading SSD

[Varroa]

Hey Guys, long story short. Was having lots of data corruption problems with 2xOCZ SSDs so I was going to RMA my drives. I bought an Intel SSD in the meantime to hold me over until my two OCZ drives came back. I ended up fixing the data corruption issue (bad timing in my ram) so I now have 3 SSD. When I use both OCZ SSDs (1xVertex 60GB and 1xAgility 120GB) all my data is fine but if I swap the Agility out for the Intel X25-M 160GB SSD I get bad data corruption on both drives. I tried bumping up the SB voltage and it reduced the amount of data corruption but it did not solve the problem. Any ideas?

Q9550 * 3.6GHz (passes prime95 overnight)
P5Q pro turbo (newest bios)
4 x 2GB Gskill 1066 Ram (at 850mhz 5,5,5,15 and passes memtest)
+high quality SATAIII shielded sata cables