Hardware Canucks

Hardware Canucks (http://www.hardwarecanucks.com/forum/)
-   RAM (http://www.hardwarecanucks.com/forum/ram/)
-   -   Patriot Memory (http://www.hardwarecanucks.com/forum/ram/4377-patriot-memory.html)

a35599 February 1, 2008 04:33 PM

Patriot Memory
 
I have put Patriot Memory (PDC22G8500ELK) into a system I have built for my kids. Its on a ASUS P5N-E SLI MB, e6750 cpu, 8800gt gpu. I have manually set the timings to the 5-5-5-15, and ever so often I BSOD. The part I can't figure is when I run memtester it passes, now if I swap out and put in OCZ reaper, no BSOD. any ideas? Oh and yeah, have benched the video card and stressed it with Nvidia Stability test, sissoft Sandra, and Everest, and it passed.:canadianwave:

3.0charlie February 1, 2008 04:56 PM

Have you tried raising the Vram by 0.1V?

a35599 February 1, 2008 05:11 PM

Vram by 0.1V
 
I'll give that a try and see what result I get.:canadianwave:

3.0charlie February 1, 2008 05:16 PM

The Patriot ram may be borderline on stability, where your OCZ may have just enough volts. If upping the volts don't work, have you tried loosening the timings?

a35599 February 1, 2008 05:19 PM

Auto timings
 
If I left timings on auto, would that stabilize it? Or just muck about them till I get it stable. I don't get the BSOD on every start, 1 out of every three maybe.:canadianwave:

3.0charlie February 1, 2008 05:29 PM

Yes, that would help stabilize. At least it would give you a rough idea. But the BSOD happens when you start the rig? What's the PSU?

a35599 February 1, 2008 05:33 PM

PSU
 
coolermaster 600 sli

a35599 February 1, 2008 05:37 PM

Up'd mem voltage
 
I up'd the mem voltage to 2.35v, just noticed it was still set to auto.
:canadianwave:

3.0charlie February 1, 2008 05:40 PM

Quote:

Originally Posted by a35599 (Post 38062)
I up'd the mem voltage to 2.35v, just noticed it was still set to auto.
:canadianwave:

You did what? 2.35V? Is the rig overclocked? If not, it should really not need 2.35V to run at stock timings - 2.1V maybe, but not 2.35V!

a35599 February 1, 2008 05:42 PM

Voltage
 
Yes, it is slightly overclocked, but the mem can handle 2.35 as stated in the spec card.
:whistle: too much?

Patriot Memory - Products


All times are GMT -7. The time now is 08:01 AM.