RAM setup & mixture help please

[trayton]

Hello all I have a few posts right now and appreciate all the input!

This one is concerning my setups and RAM. I'm hoping to put 12GB in the newer mobo I just got that has 6 slots (where as all my others have 3 (foxconn) and 4 (intel/gigabyte) I do believe?

Gigabyte EX58-UD3R (4 slots) (not sure if 1.6 or 1.7 to be honest)
GIGABYTE - Motherboard - Socket 1366 - GA-EX58-UD3R (rev. 1.7)

1. 4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory (Note 1)
2. Dual/3 channel memory architecture
3. Support for DDR3 2100+/1333/1066/800 MHz memory modules

(Go to Memory Support List for the latest memory support list.)

This machine currently has Gigabyte EX58-UD3R, i7 920 DO and 6GB Mushkin 1600 Triple Channel RAM
Part Number : 991659 (998659)

Intel DX58SO
Intel® Desktop Board DX58SO - Overview

• Four 240-pin DDR3 SDRAM Dual Inline Memory Module (DIMM) sockets
• Support for DDR3 1600 MHzς, DDR3 1333 MHzς, DDR3 1066 MHz
• Support for up to 16 GBς of system memory

This machine currently has Intel DX58SO, i7 920 DO and 6GB GSKILL 1600 Triple Channel RAM
Part Number : F3-12800CL9-2GBNQ

Foxconn BloodRage
Foxconn - Products: Motherboard
Triple DDR3 2000(**oc)/1800(**oc)/1600(**oc)/1333/1066 x 3 DIMMs, Max.12GB (Notes:Pls check our memory support list for all details)

This machine currently has Foxconn BloodRage, i7 920 DO and 6GB OCZ 1600 Triple Channel RAM
Part Number : OCZ3G1600LV6GK

ASUS P6X58D-E
ASUSTeK Computer Inc. - ASUS - ASUS P6X58D-E
6 x DIMM, Max. 24 GB, DDR3 2000(O.C.)*/1600/1333/1066 Non-ECC,Un-buffered Memory
Triple channel memory architecture
Supports Intel® Extreme Memory Profile (XMP)
*Hyper DIMM support is subject to the physical characteristics of individual CPUs.
*Refer to ASUSTeK Computer or this user manual for the Memory QVL (Qualified Vendors Lidts).

This machine is the one I want to put 12GB in currently has ASUS P6X58D-E, i7 920 DO and 8GB GSKILL RipJaws 1333 which I will have to remove as its 4x2GB Sticks in Triple Channel setup.
Part Number : F3-10666CL7D-4GBRH ( I know this has to come out to make room for the other 6 sticks I want to put in)

The 3x2GB CORSAIR RAM I have to put in it is : CMX6GX3M3A1333C9 (then just curious which one of the systems above I could mix with it? Or should I really get the exact same stuff?

Thanks in advance for any comments/suggestions and assistance :)

[trayton]

Seen quite a few views but no replies not sure if I was being clear.

I have 4 machines, each with its own RAM

2 of them have 4 DIMM SLOTS
1 of them has 1 DIMM SLOT
1 of them (newest) has 6 DIMM SLOTS

I was hoping to move the RAM I have around so that I can have the one computer maxed out with 12GB of RAM.

Will any of these work (paired together) on my : ASUS P6X58D-E
ASUSTeK Computer Inc. - ASUS - ASUS P6X58D-E

6GB Mushkin 1600 Triple Channel RAM : Part Number : 991659 (998659)
6GB GSKILL 1600 Triple Channel RAM : Part Number : F3-12800CL9-2GBNQ
6GB OCZ 1600 Triple Channel RAM : Part Number : OCZ3G1600LV6GK
6GB CORSAIR 1333 Triple Channel RAM : Part Number : CMX6GX3M3A1333C9
8GB GSKILL 1333 (in Triple Channel Setup) : Part Number : F3-10666CL7D-4GBR

Thank you for any assistance.

[ZZLEE]

try 1600 rated set together first.

will 6 sticks fit. heat spreaders are somtimes to big.

not the OCZ. you myght be lucky and your stiks are fine. OCZ RAM has a bad rep right now.

run some bench marks like " maxmen " and prime95 see if it crashes ?

the coventional wisdom is eather a full set or two identical sets.

but yoiu never know unless you try it yourself.

you will likely have to push the voltage in bios.
try 1.65 V 9-9-9 24 2:8 T2

19 multy 199 QPI

Im running 1.337 Vcore but you should be able to do it with less with D0 stepping
1.225 VTT
1.075 ICH Vcore
All my voltges should be higher than yours IM on a C0/C!

I am running this its 3.79 Mh but with only 6 GB ram

To run a custum RAM set Up you will have to play in BIOS

Let the Fun Begin

[trayton]

Alright folks I got some more RAM lol so here are the questions :

1) What should I keep?
2) What might work together?
3) What should go first (be sold)


6GB Mushkin 1600 Triple Channel RAM : Part Number : 991659 (998659) (3x2GB sticks)
6GB GSKILL 1600 Triple Channel RAM : Part Number : F3-12800CL9-2GBNQ (3x2GB sticks)
6GB CORSAIR 1333 Triple Channel RAM : Part Number : CMX6GX3M3A1333C9 (3x2GB sticks)
8GB GSKILL 1333 (in Triple Channel Setup) : Part Number : F3-10666CL7D-4GBR (4x2GB sticks)
8GB CORSAIR Vengence : Part Number : CMZ8GX3M2A1600C9 PK1 (2x4GB sticks )
8GB Kingstone : Part Number : KVR1333DN9/4G (this is a 2x4GB sticks)