My new sticks!
w0000t! Here are my new sticks! :clap:
I'll let you know what these babies can do! :thumb:
Update: This is what they do to me:
Let's hope they'll be a little better to me later on. Maybe they need to warm up?
I love that pic!
LOL. First or the second one?
Is that the ballistix in your sig?
If so, double check the default volts provided by the motherboard, and you might want to loosen up the timings to cas5 just to get started.... :)
I run mine at 2.2V 1170 freq 5-5-5-12...... :)
Yeah, those are the Tracers in my rig. I just took that pic. The signature was a goal of mine....I just achieved it! I was surprised though with how much trouble they gave me before I could start Vista up. I had 6(!)x BSOD!!! Never had any issues with OCZ.
Now they're running fine though....Still have to check what they are capable of!
I think you'll find lots of headroom on the crucial mem, although I suspect you won't get much more out of it @ CAS4.... :)
you gotta love d9's i was just playing around with mine tonight i hit 650mhz @ 5-5-5-15
Nice ram you have there. Do the lights actually represent the load you're putting on the ram?
Which kit did you buy? I've found out through the past few months that Crucial uses the same binnings for the PC2-6400 and the PC2-8500 Ballistix and Tracers. In some cases, the PC2-6400's perform better for some odd reason.
Did you reset your CMOS before adding in the new sticks you got?
Also, "D9" chips can be anything by Micron. Not all "D9's" are good performers, such as the budget D9HNL's. Overclockers are looking for D9GMH, and D9GKX - although, I've steered away from that craze, because they are unreliable, even at low voltages.
The kit (Ballistix 8500) I bought for a customer does the same thing (BSODs, reboot loops) even when underclocked (950mhz at 2.1 - 2.2 volts, 5-5-5-15) ... I'm RMAing the kit, hopefully the replacements will turn out as incredible as everyone says !
Needless to say, I'm very dissapointed :blarg:
|All times are GMT -7. The time now is 01:30 AM.|